360 Progress...
Thread Starter
|
Road Master
Joined: May 2006
Posts: 792
Likes: 0
From: LQ
360 Progress...
I'm installing my 360... came across a couple of items I thought might be of interest...
Here is the wheel.. Renegade Phoenix.. 21X3.5...
Since the Anti rotational arm comes straight up from the brake.. you'll need to create spacers to mount it to the lowers...
And since the right side is the money side, I think we're gonna get a cone shaped spacer to cover this spacer... I think it'll clean it up a bit more...
Kinda wish these items were included... I also need to create one more spacer as the one that was sent with the wheel... is about an 1/8" shy... I'm still super psyched tho, and it'll be MONEY once its rollin... [sm=icon_rock.gif]
Here is the wheel.. Renegade Phoenix.. 21X3.5...
Since the Anti rotational arm comes straight up from the brake.. you'll need to create spacers to mount it to the lowers...
And since the right side is the money side, I think we're gonna get a cone shaped spacer to cover this spacer... I think it'll clean it up a bit more...
Kinda wish these items were included... I also need to create one more spacer as the one that was sent with the wheel... is about an 1/8" shy... I'm still super psyched tho, and it'll be MONEY once its rollin... [sm=icon_rock.gif]
Fish that 360 cleaned up the left side for a 2x moneyshot!!!Man hope to see you in laughlin bro!!!
Intermediate
Joined: Feb 2007
Posts: 48
Likes: 0
RE: 360 Progress...
First time that I've seen this brake but I immediately went and pulled up some more information on it. Good looks and superior braking power (from the documentation). Please keep us informed on how your install comes out. I have a feeling that my wallet is gonna shrink a bit in the near future. Too cool.
Former Sponsor
Joined: Feb 2006
Posts: 1,879
Likes: 0
RE: 360 Progress...
Fish,
The only problem the manufacturer has in including the spacers is that there are so many wheel makers with different specs.....it would be almost impossible, but if you need something made, I will be glad to help, just let me know.....that baby is going to look SWEET
The only problem the manufacturer has in including the spacers is that there are so many wheel makers with different specs.....it would be almost impossible, but if you need something made, I will be glad to help, just let me know.....that baby is going to look SWEET
Thread Starter
|
Road Master
Joined: May 2006
Posts: 792
Likes: 0
From: LQ
RE: 360 Progress...
ORIGINAL: shooter64
Fish,
The only problem the manufacturer has in including the spacers is that there are so many wheel makers with different specs.....it would be almost impossible, but if you need something made, I will be glad to help, just let me know.....that baby is going to look SWEET
Fish,
The only problem the manufacturer has in including the spacers is that there are so many wheel makers with different specs.....it would be almost impossible, but if you need something made, I will be glad to help, just let me know.....that baby is going to look SWEET
Thanks alot... We got it covered... Just impatient.. [8D]Can't wait to get it on the road... Thanks again for everything... And if anyone's interested in one of these puppies..PM Bart (Shooter64)..
Road Warrior
Joined: May 2006
Posts: 1,571
Likes: 0
From: Houston Texas
RE: 360 Progress...
ORIGINAL: fishafly
I'm installing my 360... came across a couple of items I thought might be of interest...
Here is the wheel.. Renegade Phoenix.. 21X3.5...
Since the Anti rotational arm comes straight up from the brake.. you'll need to create spacers to mount it to the lowers...
And since the right side is the money side, I think we're gonna get a cone shaped spacer to cover this spacer... I think it'll clean it up a bit more...
Kinda wish these items were included... I also need to create one more spacer as the one that was sent with the wheel... is about an 1/8" shy... I'm still super psyched tho, and it'll be MONEY once its rollin... [sm=icon_rock.gif]
I'm installing my 360... came across a couple of items I thought might be of interest...
Here is the wheel.. Renegade Phoenix.. 21X3.5...
Since the Anti rotational arm comes straight up from the brake.. you'll need to create spacers to mount it to the lowers...
And since the right side is the money side, I think we're gonna get a cone shaped spacer to cover this spacer... I think it'll clean it up a bit more...
Kinda wish these items were included... I also need to create one more spacer as the one that was sent with the wheel... is about an 1/8" shy... I'm still super psyched tho, and it'll be MONEY once its rollin... [sm=icon_rock.gif]
Would be interested in a set of these... Lookin good....
Thread
Thread Starter
Forum
Replies
Last Post
