CARLINI 18" Fly-in Ape 1.5"
Thread Starter
|
Advanced
Joined: Aug 2008
Posts: 68
Likes: 0
From: Long Beach, CA
CARLINI 18" Fly-in Ape 1.5"
Like new. Mounted on my bike and realized they are to wide for me to get by house and camper. I have had these for less than a week!
Thickness: 1.50" in.
• Width: 41.5" in.
• Pullback (depth): 11" in.
Rise 18"
$225 FIRM- Retails for $350
PICTURE: http://img.auctiva.com/imgdata/9/9/2...29097636_o.jpg
and here http://img.auctiva.com/imgdata/9/9/2...29097675_o.jpg
Free pickup in Southern CA , Zip code 90713
RAY
lawfamily@verizon.net
Thickness: 1.50" in.
• Width: 41.5" in.
• Pullback (depth): 11" in.
Rise 18"
$225 FIRM- Retails for $350
PICTURE: http://img.auctiva.com/imgdata/9/9/2...29097636_o.jpg
and here http://img.auctiva.com/imgdata/9/9/2...29097675_o.jpg
Free pickup in Southern CA , Zip code 90713
RAY
lawfamily@verizon.net
Last edited by socalrk; Dec 9, 2009 at 03:39 PM. Reason: Image
Thread Starter
|
Advanced
Joined: Aug 2008
Posts: 68
Likes: 0
From: Long Beach, CA
Apes
Will fit ANY bike, Just get the appropriate risers for your bike. These are the Bike 1 1/2" diameter bars so you need risers for 1 1/2" bars. I have the mounts for a road king that I can also sell if you happen to have a road king. Heres the link for the info right from Carlini http://www.carlinidesign.com/handleb...s/flyin150.php
Road Master
Joined: Aug 2008
Posts: 936
Likes: 3
From: Massachusetts
Socal...talked to Carlini...those bars will NOT fit on a batwing SG or EG bagger. The 1.5 dia is too big for the fairing cap area. Risers won't work with SG and EG either.
Sweet bars though...heres a bump for ya
Sweet bars though...heres a bump for ya
Thread Starter
|
Advanced
Joined: Aug 2008
Posts: 68
Likes: 0
From: Long Beach, CA
Bars
Sure they will , JUST REMOVE THE FAIRING , Just kidding . I picked these up directly from Carlini Last week. Should have paid more attention to the width but was drooling over the bars, Anyway, To CLARIFY, will fit any bike (except Road glide and other models with factory mounted fairing, works fine for hoppe/deadcenter fairings) , WITH addition of 1 1/2" risers (which I can also sell for a road king) EXCEPT models with OEM factory fairing. Once again the link to the bars is listed above, they are the 18" and 1.5 circumfrence. Thanks
Ray
Ray
Last edited by socalrk; Dec 16, 2009 at 08:16 AM. Reason: content
Cruiser
Joined: Jun 2009
Posts: 204
Likes: 1
From: Westminster, MD
Trending Topics
Thread Starter
|
Advanced
Joined: Aug 2008
Posts: 68
Likes: 0
From: Long Beach, CA
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
