Bagger wobble
Bagger wobble
Hey guys just wanted to say thanks to the guys on one of the threads about bagger wobble...dont remember who ...doh.. I checked my back wheel with an 8ft aluminm straigt edge by jacking the bike up ( pit bull lift) and runnung it across the back wheel projecting it foward and discoverd that they where out 5/8 of an in... So i loosend the front motor mount and adj the top and bottom stabilizers (same amount of turns) and using a big screw driver to releave preasure on the bottom motor mount i lined it up.. Tightend the mounts and links. I used the manual for the basic concept and tourqe specs but the mo co way is to much bull crap and special tools that u dont need.. I little comon sence can go a long way.. Any way the bike cruses at 100mph like its in f---in rails compaird to the way it used too at 85 and whipin allover the place... Good luck charlie
PS I ALWAYS HAD THE TRW BRACE AND IT HELPED WHEN I PUT IT ON BUT THE BIKE WAS STILL A LITTLE SQUARRLIE AT HIGH SPEEDS , I ALSO PUT IN STA-BOS BUSHINGS AND I THINK THEY DO WORK TO, THEY DO INCREASE THE VIBRATION, SO WHAT, THE END RESULT IS THAT THIS F---ER IS LIKE ITS GLUED TO THE ROAD!!!!!!!!!!!!!!!!!
PS I ALWAYS HAD THE TRW BRACE AND IT HELPED WHEN I PUT IT ON BUT THE BIKE WAS STILL A LITTLE SQUARRLIE AT HIGH SPEEDS , I ALSO PUT IN STA-BOS BUSHINGS AND I THINK THEY DO WORK TO, THEY DO INCREASE THE VIBRATION, SO WHAT, THE END RESULT IS THAT THIS F---ER IS LIKE ITS GLUED TO THE ROAD!!!!!!!!!!!!!!!!!
Road Master
Joined: Dec 2007
Posts: 1,147
Likes: 2
From: CHILLIWACK B.C CANADA: have a u.s shipping adress
also interested in siplified meathod?.....
Thread
Thread Starter
Forum
Replies
Last Post
