***dyna models metric sizes database***
info added to database
Your contribution to the database is much appreciated!
I have checked my 2003 models parts catalog for this p/n and found out it's the same as used on the 2006 models.
Could you be so kind to add a link to this database in the *Search Topics * How To * Hints*?!
Thanks again,
René
Last edited by FXD2003Rider; Nov 4, 2009 at 12:38 PM.
new info found and added
After checking the hardware listing in my 2003 Dyna models parts catalog, I've found some more metric size bolts and nuts:
horn section:(see attachment #1)
horn/horn bracket nut M6, p/n 7495 .... 10mm 6-point hex wrench/socket
starter motor section:(see attachment #2)
NUT, flange M8, p/n 3403 .... 13mm 6-point hex wrench/socket
BOLT, starter M5, p/n 928 ... 8mm 6-point hex wrench/socket
SCREW w/ O-Ring M4, p/n 929A ... 7mm 6-point hex wrench/socket
___________
FXD2003Rider
horn section:(see attachment #1)
horn/horn bracket nut M6, p/n 7495 .... 10mm 6-point hex wrench/socket
starter motor section:(see attachment #2)
NUT, flange M8, p/n 3403 .... 13mm 6-point hex wrench/socket
BOLT, starter M5, p/n 928 ... 8mm 6-point hex wrench/socket
SCREW w/ O-Ring M4, p/n 929A ... 7mm 6-point hex wrench/socket
___________
FXD2003Rider
Club Member
Joined: May 2006
Posts: 14,564
Likes: 9,223
From: the 50s & the 60s
.
It is now added René.
.
also, as a companion to your 4042 bolt,
we have pn 7062
metric lockwasher M8.4 x 13 x 1.2
.
.
.
new info added
FXD2003Rider
Last edited by FXD2003Rider; Nov 7, 2009 at 06:35 AM.
Road Captain
Joined: Mar 2009
Posts: 689
Likes: 6
From: Glen Rose TX
Considering that by the time you buy 3-4 sockets or wrenchs you could have bought a full set it looks like it would be best just to get a full set of metric tools.
Heck you can buy quite a nice set of craftsman sockets/wrenchs/allens for about $125
Heck you can buy quite a nice set of craftsman sockets/wrenchs/allens for about $125
new addition
This morning when I fired up my FXD2003 to go to work, I noticed the choke/enricher knop didn't stay out and slid back, so I decided to adjust it after I came home this evening.
Doing this, I tried a 5/8 wrench which seemed to be to small so I took a 11/16 which was just a little overzised.
Trying a 17mm wrench I discovered this nut is a hex nut 17 mm, so here's a new addition to the metric sizes database.
Wondering what size nut is used on the other Dyna models/years??
If you check and let me know I'll add your info to the database as well!
Doing this, I tried a 5/8 wrench which seemed to be to small so I took a 11/16 which was just a little overzised.
Trying a 17mm wrench I discovered this nut is a hex nut 17 mm, so here's a new addition to the metric sizes database.
Wondering what size nut is used on the other Dyna models/years??
If you check and let me know I'll add your info to the database as well!
Last edited by FXD2003Rider; Apr 20, 2010 at 01:17 PM.
Road Master
Joined: May 2008
Posts: 894
Likes: 4
From: Newberg OR
Rene',
I really appreciate what you've done here, and on your other databases. I noticed some p/n?? annotations for 08 models, and thought I'd pitch in:
Jam nut on Clutch Pack (all 08 models) p/n 7848W
Rear axle (all 08 models) p/n 41114-08
Hope someone finds that useful, and thanks again!
Jeff
I really appreciate what you've done here, and on your other databases. I noticed some p/n?? annotations for 08 models, and thought I'd pitch in:
Jam nut on Clutch Pack (all 08 models) p/n 7848W
Rear axle (all 08 models) p/n 41114-08
Hope someone finds that useful, and thanks again!
Jeff
I really appreciate your positive feedback and contribution to this thread.
René
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
info added
Based upon this thread I need to know the allen key size for st bob lowers by JRK5892, I have added some info on the allen head socket to the index.
This info was posted by SC-Longhair.
Thanks for sharing, Vic!
Socket, 1/2"; 12 mm; Impact; Hex Driver Metric; 6 Product Line: NAPA AirTools Part Number: NPT 615312
This info was posted by SC-Longhair.
Thanks for sharing, Vic!
Socket, 1/2"; 12 mm; Impact; Hex Driver Metric; 6 Product Line: NAPA AirTools Part Number: NPT 615312
