When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[Originally Posted by UltraNutZ][how thick are the layers? if more than 1/4" I wouldn't use more than 1 layer. too much is just as bad as not using it at all.]
[BuzzL][What I got from Wally world is 1/2" thick. So, do I just need to do 1 layer of 15"x15"? Thanks.]
[Originally Posted by UltraNutZ ][2 layers will work for you BuzzL]
Just trying to be clear on the thickness, the above quotes are a little confusing. Thanks
Welcome to the forum Thad, and welcome to another brother from Minny. I don't think there's an exact science to adding polyfill. You don't want it jammed in there like you're stuffing a pillow and you don't want it sitting in the bottom of the pod like a used Kleenex. Experiment a little. Put your fill in, run the stereo and listen. Take it out and listen. Fill it up with more and listen. Find out what your ear and the speaker likes! You're just giving some dampening with the fill.
Wow, I guess I always try to title my threads so they can be found with the search option and I guess this one worked.
Thad, a few words of advice is play around with it for what you like best like was just mentioned (cpbedor) and buy the sheets of it. I bought it at a hobby/material place but have heard of it coming from lots of places. BUY SHEET TYPE, not stuffing like a pillow.
Thanks, Guys, I had a setback last year and never got the install done. So I have had a few $$ in stereo hardware staring at me everytime I open my closet. Time to getter done. Here's to hoping no out of box failures after waiting so long.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.