I know its out there

Reply Subscribe

Thread Tools

Search this Thread

Sep 17, 2019 | 04:02 PM

TwoBlue02

Thread Starter

Road Captain

Joined: Jun 2012

Posts: 719

Likes: 69

From: Waxhaw NC

I know its out there

I have been from one end of the internet to another with no luck. I am looking for any instructions, videos etc. of doing an install of a new amp/4 speakers --- with the stock HU. I know about the line converters, what I need to know is do I buy pins and insert them into the stock wiring harness or splice wires? I did this years ago and putting the pins in the headshell was a PITA. This is for a 2010 Ultra.

Thanks

Sep 17, 2019 | 05:04 PM

SBates08

Seasoned HDF Member

Joined: Jan 2013

Posts: 10,637

Likes: 1,246

From: Lake, Ms

I would splice the wires into the LOC.

Sep 17, 2019 | 07:57 PM

2slow05

Tourer

Joined: Apr 2019

Posts: 443

Likes: 52

From: Beaumont Tx

Splice into the wires going to the speakers. That’s what I did when I installed the loc on my 08 ultra, don’t worry with pulling the pins. The front ones are easy just cut the wires a few inches back from where they go to the speaker and split there. The rear I found the wires coming out of the plug going to the rear speakers and cut a few inches back and made the split there.