Ground issue
Thread Starter
|
Novice
Joined: Jul 2019
Posts: 24
Likes: 1
From: tx
Ground issue
Ok so I installed sound digital evo x 800.4 and a dsr1. I have been trying to trouble shoot this most of the day installed everything ran amp wires to amp that were installed for previous amp wires in dsp first ran all dsp wires to head unit wires powered on everything and worked fine wen to turn off and amp radio and dsp stayed on. Finally re did wiring ran dsp and head unit ground straight to battery ground and still having issue. If I unplug dsp all shut off same with the main wiring harness to bike trinkets module. What am I missing here.
Thread Starter
|
Novice
Joined: Jul 2019
Posts: 24
Likes: 1
From: tx
Ok so I installed sound digital evo x 800.4 and a dsr1. I have been trying to trouble shoot this most of the day installed everything ran amp wires to amp that were installed for previous amp wires in dsp first ran all dsp wires to head unit wires powered on everything and worked fine wen to turn off and amp radio and dsp stayed on. Finally re did wiring ran dsp and head unit ground straight to battery ground and still having issue. If I unplug dsp all shut off same with the main wiring harness to bike trinkets module. What am I missing here.
Thread Starter
|
Novice
Joined: Jul 2019
Posts: 24
Likes: 1
From: tx
yeah Im a dum dum I realized after I posted this that the remote wire from when I wired in last amp without dsp was still had remote on hot wire to lighter.
I have it wired into the amp remote wire.
I have it wired into the amp remote wire.
Stellar HDF Member
Joined: Oct 2015
Posts: 2,681
Likes: 851
From: Puyallup, wa
I didn't like anything in the fairing for an amp ground. If I am running it back to the chassis and I am running a power wire to the battery why not just run the ground too. You want it somewhere that is as protected from the elements as possible.
Thread
Thread Starter
Forum
Replies
Last Post
Gunslingerglide
Audio Systems
18
Jun 16, 2017 06:50 AM
