When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Don't have pictures, but many people on this board have said that you can get two, side by side, on top of the head unit. You may need to trim a little of the gauge mounts to get them to sit that far back. Then you just use the Hogtunes bracket to install the third.
so i get 3 coats of primer done, all wetsanded, turned out beautiful. Let them dry real good then ran a tack cloth over them and proceeded to paint. First light coat went on perfectly, 2nd coat perfectly, 3rd coat perfectly. Start light spraying the 4th and final coat before clear coat and the MF orange-peeled in a couple of areas. So going grab some more paint today, wet sand it back down with 1200 and spray again. I think it was something (maybe oil or moisture) in the bottom of the can. Pissed me off! So I just drank beer and watched the Saints game....
Okay UN, still waiting on the results. Especially interested in the false bottom on the tour pak. I think you teased us a bit with another recent post where you showed 3 amps in the tour pak, was that it? How about a taste of how the project is coming along?
i can happily say the project is complete... my problem as of lately is finding time to put together the documentation and pics for you guys. Lots of pics and lots of words.. and a few words of wisdom like "don't ever do this to your bike" LOL
Maybe this weekend I'll get left alone long enough to put it together for you... stay tuned.. it's coming.. promise...
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.