FXDX trans question
Thread Starter
|
Tourer
Joined: Sep 2012
Posts: 428
Likes: 59
From: Hamilton
FXDX trans question
Okay, I've got a 2001 Dyna Sport DX (TC88) with a mysterious leak that appears to come from my transmission or primary.
I'm not asking to help diagnose the leak.
I'd like to know how far I have to go to replace all of the gaskets and o-rings on the trans.
All the way to cartridge removal?
I'll have to remove the primary, so I'll be changing those gaskets as well.
My apologies if I haven't asked this question properly or if it's been answered already in another thread.
Thanks.
I'm not asking to help diagnose the leak.
I'd like to know how far I have to go to replace all of the gaskets and o-rings on the trans.
All the way to cartridge removal?
I'll have to remove the primary, so I'll be changing those gaskets as well.
My apologies if I haven't asked this question properly or if it's been answered already in another thread.
Thanks.
Seasoned HDF Member
Joined: Dec 2005
Posts: 19,939
Likes: 8,037
From: poway
If you are talking trap door removal then no.. You will need to remove the inner primary bearing and pulley if you want to get all the seals. Those require special tools or at least something rigged up..
Road Warrior
Joined: Apr 2007
Posts: 1,525
Likes: 4
From: Johnson City TN U.S.A.
If you're close to Johnson City TN I can lend you what you need.
They are all available on Amazon too, not expensive.
The pressed race bearing usually has to be split, not enough room for a puller.
They are all available on Amazon too, not expensive.
The pressed race bearing usually has to be split, not enough room for a puller.
Thread
Thread Starter
Forum
Replies
Last Post
landslide03
Primary/Transmission/Driveline/Clutch
11
Jun 7, 2012 12:55 PM
