2000 Dyna Wide Glide
Thread Starter
|
Stage I
Joined: Jun 2020
Posts: 1
Likes: 0
From: Wyandotte, Michigan
2000 Dyna Wide Glide
Just bought a 2000 Dyna Wide Glide, rose it home, now it won’t start, I’ve change the ignition coil, spark plugs, plug wires, battery, relay, and circuit breaker, Cleaned the carb and rebuilt it, still seems to not be getting a spark.
Stellar HDF Member
Joined: Mar 2006
Posts: 3,124
Likes: 255
From: From Long Island, now in So. Cal
It might be the Crank Position Sensor:
Crank Position Sensor Failure on '04 Dyna
https://www.hdforums.com/forum/dyna-...n-04-dyna.html
Dyna FXDX 2000 ERROR Code 41
https://www.hdforums.com/forum/dyna-...code-41-a.html
HARLEY-DAVIDSON® PARTS FINDER
https://shop.suburbanharley.com/oem-..._SENSORS_%26/y
.
Crank Position Sensor Failure on '04 Dyna
https://www.hdforums.com/forum/dyna-...n-04-dyna.html
Dyna FXDX 2000 ERROR Code 41
https://www.hdforums.com/forum/dyna-...code-41-a.html
HARLEY-DAVIDSON® PARTS FINDER
https://shop.suburbanharley.com/oem-..._SENSORS_%26/y
.
Tourer
Joined: Sep 2013
Posts: 497
Likes: 575
From: Maryland
I have a '00 WG also.Did the bike throw a code? When the ignition switch is turned on the engine light comes on for 4 seconds then turns off. If it stays off you're good, no codes. If it comes back on for 8 seconds then goes off, there's a stored code. If the light comes back on and stays on, there's a current code. There's a procedure in the book for reading the codes using a jumper and the engine light, you don't need the Harley scan tool. That's how I diagnosed my bad CKP, which caused very similar symptoms to yours.
Thread
Thread Starter
Forum
Replies
Last Post
