Not getting fire. Have replaced the stator, rotor, crankshaft position sensor, voltage regulator, coil and plug wires and still no spark. Any ideas

 

is the fuel pump coming on?

 

Do you have compression in the rear cylinder and a sparkplug installed?

 

Yes I have compression in both cylinders and the fuel is going in you can definitely smell it and yes spark plugs are installed

 

If the injectors are dumping fuel into the cylinders, fuel pump running but no spark, there should be codes.

 

snd a video of it cranking, because once the fuel pump is running and you can crank the bike, it should spark unless its cranking lazy

 

check for voltage at the coil and continuity from the coil to the ecm

 

Want to apologize for not replying to all questions and advise. I've been dealing with some medical issues. Home now and in a couple days will be able to get back to my stress relief/bike.
Thanks again

 

hope you are ok. Health comes first. Wishing you a fully recovery