Fuel gauge troubleshootings
Thread Starter
|
Tourer
Joined: Apr 2006
Posts: 256
Likes: 0
From:
Fuel gauge troubleshootings
I've a new Led fuel gauge cross. I've seen a gray wire to 3,5 Volt but I don't known where must I connect it in the Street Bob. I've plug on the mammout without plugging the gray wire and seem to work but I'm not sure.
Help me!
[IMG]local://upfiles/11003/D718987877DE4AA887B267D69891E8ED.jpg[/IMG]
Help me!
[IMG]local://upfiles/11003/D718987877DE4AA887B267D69891E8ED.jpg[/IMG]
Tourer
Joined: May 2007
Posts: 358
Likes: 0
From:
RE: Fuel gauge troubleshootings
http://www.cyclespot.com/forums/showthread.php?t=9091
dont know if this is the answer but seems logical. it might be for the low fuel light.
dont know if this is the answer but seems logical. it might be for the low fuel light.
Cruiser
Joined: Aug 2007
Posts: 162
Likes: 0
From:
RE: Fuel gauge troubleshootings
That's the wire that lights up the low fuel light. You cut the existing wire from the old gauge and splice it in. I don't know where it is on your model, but it was easy to do on my Lowrider. I'm not sure it is even needed because the left LED on the gauge flashes red and gets your attention, but I connected it anyway. Now I have no excuse to run out.
Thread
Thread Starter
Forum
Replies
Last Post
