fxdx bar conversion/speedo placement advice!
Thread Starter
|
Stage II
Joined: Sep 2008
Posts: 2
Likes: 0
fxdx bar conversion/speedo placement advice!
Hey all
I am planning on switching my stock 2000 dyna fxdx bars to drag bars with 4" risers. My issue is the large, clunky speedo/tach, currently mounted between the existing bars. I am looking to clean it up and minimize the front, and am willing to ditch the tach. Anyone seen a clean replacement speedo, or alternative mount that will not look as bulky and cumbersome as the current stock setup?
thanks in advance
I am planning on switching my stock 2000 dyna fxdx bars to drag bars with 4" risers. My issue is the large, clunky speedo/tach, currently mounted between the existing bars. I am looking to clean it up and minimize the front, and am willing to ditch the tach. Anyone seen a clean replacement speedo, or alternative mount that will not look as bulky and cumbersome as the current stock setup?
thanks in advance
Cruiser
Joined: Sep 2008
Posts: 204
Likes: 0
From: Gilford NH
carlini makes some gauge mounts to fit between the risers. Pricey but worth it in the long run I'd imagine. I'm thinking about picking one up when my drags come in. http://www.carlinidesign.com/harley-...ount/index.php
hth
hth
Intermediate
Joined: Jul 2005
Posts: 37
Likes: 0
From:
I used the Accutronix gauge mount, still leaves the stock gauges sticking up in the air, but worked for me. Here's the link: http://www.accutronix.com/products/risers/R1.shtml
Thread
Thread Starter
Forum
Replies
Last Post
