Fluid capacities needed

Reply Subscribe

Thread Tools

Search this Thread

Aug 29, 2009 | 09:57 AM

texdgl

Thread Starter

6th Gear

Joined: Feb 2006

Posts: 14

Likes: 0

Fluid capacities needed

I just bought an 08 FXDC w/400 miles. The previous owner is mailing the owners manual to me in a few days but I want to change the fluids out this weekend. Could someone give me the oil, trans, and primary capacities? Thanks.

Aug 29, 2009 | 10:04 AM

HOGRIDA_06

Outstanding HDF Member

Joined: Mar 2006

Posts: 2,862

Likes: 7

From: Western, NY

1 qt. in trans, 1 qt. in primary, And 2.5 qt. in engine. Engine may need a bit more, but start w/ 2.5 qt. Then run it and check the dip stick while hot and add if needed.

Aug 29, 2009 | 10:40 AM

JaronB

Ultimate HDF Member

Joined: Dec 2008

Posts: 5,120

Likes: 17

From: Indiana

Quote:

Originally Posted by HOGRIDA_06

1 qt. in trans, 1 qt. in primary, And 2.5 qt. in engine. Engine may need a bit more, but start w/ 2.5 qt. Then run it and check the dip stick while hot and add if needed.

+1 just did mine last week.

Aug 29, 2009 | 10:57 AM

texdgl

Thread Starter

6th Gear

Joined: Feb 2006

Posts: 14

Likes: 0

Thanks for the info. One last question, Is the dipstick supposed to be checked with the bike leaning on the stand or upright? Thanks again.

Aug 29, 2009 | 10:59 AM

JaronB

Ultimate HDF Member

Joined: Dec 2008

Posts: 5,120

Likes: 17

From: Indiana

Quote:

Originally Posted by texdgl

Thanks for the info. One last question, Is the dipstick supposed to be checked with the bike leaning on the stand or upright? Thanks again.

Leaning for the trans and the engine

Aug 29, 2009 | 11:12 AM

OhioSkully

Club Member

Joined: Nov 2007

Posts: 4,474

Likes: 6

From: Port Charlotte, Florida

engine oil is checked with the bike on the jiffy stand and the cap screwed all the way in. Tranny is checked on the jiffy stand and not screwed in to the hole. And primay i have always filled on the jiffy stand till its at the edge ready to come out