how could i make these trees work???
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 60
Likes: 0
how could i make these trees work???
ok so im ready to install my new front end and from what ive read and from the responses i got here it should have bolted right up and i would have no problem...not the case though.
im fitting a set of trees from a 2003 softail standard on to my 2004 dyna fxdl, and when i when to check the fork stops i noticed that instead of working with the fork stops on the dyna neck, the edges of the triple tree hit the frame first and dont even contact the fork stops on my neck.
so what im asking is there any way to make these trees work of my frame? have any of you done this? and if not what is my next step?
Thanks,
Brandon
im fitting a set of trees from a 2003 softail standard on to my 2004 dyna fxdl, and when i when to check the fork stops i noticed that instead of working with the fork stops on the dyna neck, the edges of the triple tree hit the frame first and dont even contact the fork stops on my neck.
so what im asking is there any way to make these trees work of my frame? have any of you done this? and if not what is my next step?
Thanks,
Brandon
Intermediate
Joined: Feb 2010
Posts: 31
Likes: 0
From: Huntersville, NC
I have not done this, but my uncle has a 2001 lowrider withi a softail front end. I believe he ground the stops off of the neck because softail stops are built into the tree.
Don't quote me on that though, I may not be remembering quite correctly.
Don't quote me on that though, I may not be remembering quite correctly.
Road Master
Joined: Oct 2007
Posts: 1,213
Likes: 1
From: Hot Springs Village AR
you need to grind or cut the stops on the trees not the neck, you only need to do the neck if you are putting on FL trees or trees from a deuce, but be careful not go grind off to much and also make sure you position the stem right so you don't lose your fork lock. I racked my brain when I did mine, good luck. Sorry about the bad pic but I think you get the idea
Last edited by roofer; Mar 6, 2010 at 07:53 PM.
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 60
Likes: 0
and this is why i keep coming back 
. yall always have a solution for EVERYTHING!
ok so im going to have to basically grind down the back corners of the trees like the pic above, that makes alot of sense now. but one question, how would you go about doing so without hurting the chrome and making it look right?
again thank yall SO much, i thought i was going to have to buy another set of trees. and roofer any more helpful hints would be greatly appreciated.
. yall always have a solution for EVERYTHING! ok so im going to have to basically grind down the back corners of the trees like the pic above, that makes alot of sense now. but one question, how would you go about doing so without hurting the chrome and making it look right?
again thank yall SO much, i thought i was going to have to buy another set of trees. and roofer any more helpful hints would be greatly appreciated.
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
ok so im ready to install my new front end and from what ive read and from the responses i got here it should have bolted right up and i would have no problem...not the case though.
im fitting a set of trees from a 2003 softail standard on to my 2004 dyna fxdl, and when i when to check the fork stops i noticed that instead of working with the fork stops on the dyna neck, the edges of the triple tree hit the frame first and dont even contact the fork stops on my neck.
so what im asking is there any way to make these trees work of my frame? have any of you done this? and if not what is my next step?
Thanks,
Brandon
im fitting a set of trees from a 2003 softail standard on to my 2004 dyna fxdl, and when i when to check the fork stops i noticed that instead of working with the fork stops on the dyna neck, the edges of the triple tree hit the frame first and dont even contact the fork stops on my neck.
so what im asking is there any way to make these trees work of my frame? have any of you done this? and if not what is my next step?
Thanks,
Brandon
Trending Topics
Road Master
Joined: Oct 2007
Posts: 1,213
Likes: 1
From: Hot Springs Village AR
Those trees have 3 degrees of rake in them. I did not like the turning radious of the bike on slow turns like a u-turn I felt I was going to fall over and I like to be able to make a quick u-turn when needed, as far as rusting mine have not rusted or my wifes bike and how often do you ride in the rain.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
Ultimate HDF Member
Joined: Oct 2007
Posts: 7,562
Likes: 11
From: Palm Harbor fl.
Those trees have 3 degrees of rake in them. I did not like the turning radious of the bike on slow turns like a u-turn I felt I was going to fall over and I like to be able to make a quick u-turn when needed, as far as rusting mine have not rusted or my wifes bike and how often do you ride in the rain.
Thread
Thread Starter
Forum
Replies
Last Post
