FL-Dyna: Bag Brackets Made

Reply Subscribe

Thread Tools

Search this Thread

Jun 22, 2010 | 09:46 PM

U-234

Thread Starter

Road Warrior

Joined: Jan 2009

Posts: 1,489

Likes: 23

From: East of Tulsa

FL-Dyna: Bag Brackets Made

I had some 1/8 stainless custom bent (the guy that did it use the term,"break" instead of bend). Anyway one side is 2.5in and the other 1.175in. Then I took the 2 twenty inch pieces to Richard in Jay and he made the angle pieces into what you see here. They will be powder coated black along with a few other items when the tins go to the paint shop. Which I am now ready for. But I don't have a painter lined up yet.

Jun 22, 2010 | 09:59 PM

U-234

Thread Starter

Road Warrior

Joined: Jan 2009

Posts: 1,489

Likes: 23

From: East of Tulsa

Here's the pics. Had a computer lock up. The bags are attached to an early FLH Shovelead bag bracket. The FLH bag bracket is bolted through the rear hole through the stainless and into the rear strut hole. Front hole on the FLH bracket is bolted to the stainless. The stainless front hole is bolted to the front hole of the strut.

Attached Thumbnails

Last edited by U-234; Jun 22, 2010 at 10:08 PM.

Jun 23, 2010 | 10:23 AM

JRK5892

Banned

Joined: Mar 2007

Posts: 19,481

Likes: 25

From: Chicago suburbs (Elgin/Schaumburg)

nice man! very very nice! i have a set of those in the back of the shop that i powdered for my wifes bike, may have to pull them out and try this for her