Torque specs help
Thread Starter
|
Stage I
Joined: Sep 2010
Posts: 1
Likes: 0
Torque specs help
Just bought my first Harley, 08 FXDC Dyna Super Glide Custom. Im in the middle of installing forward controls. I started the "long way" then read the "work around" in a post on this forum... sneak a hacksaw blade behind the primary chain case housing and cut the splined shaft off. That saved me about $100 and probably 3 days of waiting on a sprocket locking tool, Im not a big fan of waiting around when I could be getting something accomplished. Now Im waiting on the manual to come in and was hoping to find some help on here. I need the torque specs for the chain tensioner bolts, the primary cover bolts and the six 10mm clutch bolts (and if there is a tightening sequence)
Last edited by jwilliams; Sep 10, 2010 at 09:49 PM. Reason: I left out info
Seasoned HDF Member
Joined: Mar 2010
Posts: 38,422
Likes: 6,368
From: Honah Lee
Torque
Just bought my first Harley, 08 FXDC Dyna Super Glide Custom. Im in the middle of installing forward controls. I started the "long way" then read the "work around" in a post on this forum... sneak a hacksaw blade behind the primary chain case housing and cut the splined shaft off. That saved me about $100 and probably 3 days of waiting on a sprocket locking tool, Im not a big fan of waiting around when I could be getting something accomplished. Now Im waiting on the manual to come in and was hoping to find some help on here. I need the torque specs for the chain tensioner bolts, the primary cover bolts and the six 10mm clutch bolts (and if there is a tightening sequence)
Thread
Thread Starter
Forum
Replies
Last Post
joromu
Primary/Transmission/Driveline/Clutch
34
Jun 12, 2023 10:28 AM
soft 02
General Harley Davidson Chat
4
Aug 24, 2013 03:44 PM
johnharley
Primary/Transmission/Driveline/Clutch
3
Jun 23, 2012 05:55 AM
