Gas tanks?
The FXDX actually does have a ton of slack with the stock bars for whatever reason. Guys on here have gone to 10" T-bars with stock cables, not sure about apes though. I have 9" rise bars and I needed a new clutch cable. I got a +4 one and I could have got away with stock, had to be creative with the routing to get it to look clean.
Thread Starter
|
6th Gear
Joined: Jun 2012
Posts: 10
Likes: 0
From: Billerica
Thanks good Apollo I appreciate it to the other guy no need to act like a punk the reason their is a forum is so people can gather information and share information with fellow bikers not cool man if you don't like the post don't comment if you saw the amount of slack on the front of this bike you realize why I would be curious
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 48
From: Ogden, UT
Thanks good Apollo I appreciate it to the other guy no need to act like a punk the reason their is a forum is so people can gather information and share information with fellow bikers not cool man if you don't like the post don't comment if you saw the amount of slack on the front of this bike you realize why I would be curious
The thing is you are buying a 12 year old used bike, who knows what mods have been done, you give ZERO details such as are the bars actually the stock bars, are the cables the stock cables...
How do you expect anybody to give you a serious answer?
Some things like tank swaps are relatively cut and dry, answering questions to which there may be numerous variables will get you what you got. The answers you are getting are worthless if you left out any important details, many guys on here will just guess or tell you what they have heard on the grapevine.
Everyone also has a different idea about what looks good when it comes to cables, some do not mind cables that look like they could play a tune, others like me prefer they be neatly routed and not taught at all.
When I changed from my stock 10" mini apes to 14" Wild1 apes I had to get different cables because they were nearly 8" wider than stock as well.
You should know how to operate a tape measure, figure it out since you can see it.
My apologies if I hurt your feelings, but get real, provide enough information to get thoughtfull answers and you will get them.
Thread
Thread Starter
Forum
Replies
Last Post
RandyDowdy
Carburetor Related
9
Aug 10, 2010 11:50 PM
