04 Lowrider Project (almost done) - PIC HEAVY
Thread Starter
|
Advanced
Joined: May 2013
Posts: 94
Likes: 0
From: Montana
04 Lowrider Project (almost done) - PIC HEAVY
Hey everyone i finally got the bike back together and thought i would share the pics.
I bought a 2004 FXDLi that had been wrecked and i wanted to rebuild it as a project but nothing too crazy or custom since money was def an issue (when isnt it?)
> powder costed the tank and fenders
> I changed the bars to 14" chubbys, ran the wires inside (pain in the *** lol)
> new braided clutch, idle, throttle, and brake cables
> wasnt too fond of the stock dyna front fender so i changed to a nesi
> chopped about 6 inches off the back fender and relocated the brake and turn lights
> side mount license plate
> added forward controls
> dropped the back end down another 1.5 inches with slammers
> added V&H short shots
> ended up having to add a Thundermax and having to weld in O2 sensors since my EFI bike didnt have any stock ones
> low profile gas gauge and filler
> mustang seats with back rest
Just cause i keep getting asked.....yes the pull back risers look odd and they are only a temp fix while i get the spike straight ups fixed up.
I bought a 2004 FXDLi that had been wrecked and i wanted to rebuild it as a project but nothing too crazy or custom since money was def an issue (when isnt it?)
> powder costed the tank and fenders
> I changed the bars to 14" chubbys, ran the wires inside (pain in the *** lol)
> new braided clutch, idle, throttle, and brake cables
> wasnt too fond of the stock dyna front fender so i changed to a nesi
> chopped about 6 inches off the back fender and relocated the brake and turn lights
> side mount license plate
> added forward controls
> dropped the back end down another 1.5 inches with slammers
> added V&H short shots
> ended up having to add a Thundermax and having to weld in O2 sensors since my EFI bike didnt have any stock ones
> low profile gas gauge and filler
> mustang seats with back rest
Just cause i keep getting asked.....yes the pull back risers look odd and they are only a temp fix while i get the spike straight ups fixed up.
Last edited by JDavis187; Aug 29, 2013 at 10:14 AM. Reason: Added updated photos 8-29-13
Thread Starter
|
Advanced
Joined: May 2013
Posts: 94
Likes: 0
From: Montana
here is a link to all the photos of the before during and after
http://www.flickr.com/photos/8460701...7635100626248/
http://www.flickr.com/photos/8460701...7635100626248/
Last edited by JDavis187; Aug 16, 2013 at 12:35 PM.
Tourer
Joined: Jun 2012
Posts: 421
Likes: 1
From: Stafford VA
Looks good! One thing I would've done differently is left the long rear fender. Imho it doesn't flow very well with the long front bobbed rear.
Trending Topics
Advanced
Joined: Jun 2012
Posts: 55
Likes: 0
From: Texas
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
