Taller risers on Fat Bob?
Thread Starter
|
Cruiser
Joined: Jun 2009
Posts: 183
Likes: 0
From: Jersey
Taller risers on Fat Bob?
Want to put taller risers on the Bob. Love the distance to the bars just wish to raise hands up a bit higher. How much taller can you go before cable and control issues. Don't really want to replace the entire bar set up. Also would rather not play the trial and error game. Any help would be appreciated
Cruiser
Joined: Mar 2012
Posts: 183
Likes: 2
From: Earth
If you just want it a bit higher DK Customs has 1", 2" and 3" riser spacer kits or spacerjim.com has a similar product. 2" will work with no changes if you have a 2010 or earlier. The 2011+ supposedly have a slightly shorter clutch cable so you can only go 1" without replacing it. I have the DK customs 2" with a longer clutch cable on my 2012.
http://www.dkcustomproducts.com/Hand...r-Kits_c16.htm
http://spacerjim.com/HarleySpacers.html
http://www.dkcustomproducts.com/Hand...r-Kits_c16.htm
http://spacerjim.com/HarleySpacers.html
Outstanding HDF Member
Joined: Jul 2008
Posts: 2,111
Likes: 8
From: NW Arkansas
I got 8" risers on mine off ebay and the clutch is a little tight when I turn fully to the right like when moving it around the driveway, I ran the clutch cable up through the inside of the frame to get another inch or so also.
.
.
Thread
Thread Starter
Forum
Replies
Last Post
