Can I remove this bracket?
Road Captain
Joined: Nov 2009
Posts: 739
Likes: 5
From: West Memphis, AR
With my short exhaust It was not used. Could not get to the bolts holding it on so painted it black. Went to Supertrapp Supermeg 2:1 exhaust and it uses the bracket. Paint it black and ride.
Elite HDF Member
Joined: Jul 2005
Posts: 3,968
Likes: 34
From: Lockport Township, IL
Okay - I spent an hour in the garage and got two of the three bolts out. The third one requires a special wrench. T-27 bit and I used a dremmel cut off wheel to shorten the bit and am gluing (with JB Weld) the shorten Torx bit into a 1/4 inch box wrench. When the JB Weld sets, the wrench should be thin enough to fit between the bracket and frame. I will report tomorrow how it goes. If it works, I will be happy to mail the home-made T-27 / 1/4"wrench to anyone else that wants to remove the bracket. All I will ask is that when you are done with it - mail it on to the next guy that wants to use it.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Master
Joined: Nov 2006
Posts: 1,097
Likes: 11
From: Huntley, IL
I took that bracket off too. I took off what bolts I could reach. Then I tapped the bracket back and forth with a hammer till the bolt got loose and took it out with a pair of pliers. No special tools.
Elite HDF Member
Joined: Jul 2005
Posts: 3,968
Likes: 34
From: Lockport Township, IL
I got my bracket off this morning. The tool I made worked only well enough to back the bolt our about 1/4 inch. I used a hacksaw blade (no handle because it would not fit in there) to cut the head off the bolt and the bracket came right off.
