Do We Have A Cam Chain Problem
Thread Starter
|
Novice
Joined: May 2014
Posts: 21
Likes: 0
From: North Carolina
Do We Have A Cam Chain Problem
I have a couple of friends who have 2012 models with the 103. These guys ride quite a bit so both have around 20K miles. One of their bikes, a Street Glide, broke it's cam chain a couple of weeks ago. I was with him and we were riding along on the highway about 60 and it made a noise and just broke. The second guy who has a Road Glide got worried and took his in. The chain was worn out.
Now the dealer that both bought their bikes from is saying that everyone is going to have to change the chain every 20K miles or so. I hope like the devil that this is not right because unless you can do it yourself it is not a cheap repair.
My question for you guys is:
1. Have any of you heard anything about this?
2. Have any of you had this problem?
Thanks.
Now the dealer that both bought their bikes from is saying that everyone is going to have to change the chain every 20K miles or so. I hope like the devil that this is not right because unless you can do it yourself it is not a cheap repair.
My question for you guys is:
1. Have any of you heard anything about this?
2. Have any of you had this problem?
Thanks.
Outstanding HDF Member
Joined: Jun 2008
Posts: 2,374
Likes: 5
From: redbank new Jersey
That gear drive is not answer either as most newer bikes all have some kind of runout... Its really not a big job I just plan on going in there every 30,000 miles and change get them what else can u do... I also do have the hydro cam chain upgrade done
Thread Starter
|
Novice
Joined: May 2014
Posts: 21
Likes: 0
From: North Carolina
Magnum
Thanks.
HDF Community Team
Joined: Jun 2006
Posts: 12,776
Likes: 2,607
From: san antonio
The two incidents of broken cam chains are the first I have ever heard of. JMHO, but I doubt that broken cam chains are an epidemic nor will they need replacement every 20K miles. Also JMHO but I doubt that the cam chains just "broke" and I suspect that something else caused the cam chain to break. If you can, provide a follow up with the results of what the techs find when they tear down the motors.
Thread Starter
|
Novice
Joined: May 2014
Posts: 21
Likes: 0
From: North Carolina
I will do that. The thing that bothered me the most was not the fact that two bikes had failures but that the dealer seemed to think that there might be a large scale problem. If any of you guys hear of any of these problems please keep us updated.
Trending Topics
HDF Community Team
Joined: Jun 2006
Posts: 12,776
Likes: 2,607
From: san antonio
Don't take your bike to that dealer for service. Get a service manual and DIY.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Novice
Joined: Apr 2010
Posts: 20
Likes: 0
From: Stockton Ca.
cam chain
The dealers have mechanics, not technicians. I changed my 05 88B from the stock timing type chain and phenolic tensioners at 50k to the andrews roller chain and hyd poly tensioners. I just did, (at 101k) a bottom end tear down and repair, (fixing dealer caused crank bearing issue) and my chain was like new and the outboard tension shoe had minor wear. I'm a retired millwright and I have seen lots of roller chain failures on machinery. Make sure it's getting oil and check it once in a while; they aren't that hard to take of, unless it's the inner chain. 
Ultimate HDF Member
Joined: Apr 2010
Posts: 5,308
Likes: 9
a 2012 should run 100k without a cam chain problem...no telling how many compensators and other problems you may encounter. i am pushing 50k on my '12 EGC and do not worry about cam chains--too much other stuff to worry about!
Thread
Thread Starter
Forum
Replies
Last Post