New Woods Cam.....
Thread Starter
|
Seasoned HDF Member
Joined: Mar 2010
Posts: 21,116
Likes: 7,638
From: Poolville
My Own Grind..
I expanded on the w8, hoping to increase dynamic compression a tick or 2 that should put me at 9.8 and at the same time increasing the duration to help it breath more without increasing lift and a ccp of 206 psi. It's all a crap shoot and a dyno will let me know. If I can't get the 100/100 this time oh well it's been fun trying and I'll just have to enjoy what I have..
Thread Starter
|
Seasoned HDF Member
Joined: Mar 2010
Posts: 21,116
Likes: 7,638
From: Poolville
Travel limiters
Hey Schex, Just so you know you can't get the shims anymore from S&S they discontinued them. I had to buy a complete set of lifters S&S 33-5353. Don't know how much longer they will be available but I have heard they help with lifter bleed down on hot restarts. I should know by the middle of March if they made any difference or not. The nice thing about the lifters are that they will handle higher rpm's better and the axle is larger than stock...
Thread
Thread Starter
Forum
Replies
Last Post
