Wich VOES?
Thread Starter
|
Stellar HDF Member
Joined: Sep 2011
Posts: 3,127
Likes: 1,760
From: In The Woods, PA
Wich VOES?
I am collecting all the parts to convert my 1998 flhtcui from efi to carb. I have just about everything, but am hung up on a VOES. Should I just bite the bullet and get the on from the Moco? Are there any aftermarket alternatives? So far I've got a pingel fuel valve and tank adapters. S&S Super E kit, ultima ignition, and dynatek dc6-1 coil. I've mapped out my wiring and just need to get the VOES.
Thread Starter
|
Stellar HDF Member
Joined: Sep 2011
Posts: 3,127
Likes: 1,760
From: In The Woods, PA
I checked that. The ones off ebay don't look like the ones in the micro fische. most are round, like a canister. The ones I found on ebay have 3 mounting holes and have a female connector for 3 wires.
http://www.ebay.com/itm/98-Harley-Da...41602e&vxp=mtr
http://www.ebay.com/itm/98-Harley-Da...41602e&vxp=mtr
Seasoned HDF Member
Joined: Nov 2006
Posts: 12,878
Likes: 5,449
From: la la land jerzey
different -
you want one that kicks off at 5 1/2 inches of vacuum - if the one you get does not it is adjustable - can help you need a vacuum pump and an ohm meter and some silicone -- you want a round one w/ 2 wires any will do cheapest is usually a sporty
you want one that kicks off at 5 1/2 inches of vacuum - if the one you get does not it is adjustable - can help you need a vacuum pump and an ohm meter and some silicone -- you want a round one w/ 2 wires any will do cheapest is usually a sporty
Thread
Thread Starter
Forum
Replies
Last Post
89325iturbo
Ignition/Tuner/ECM/Fuel Injection
3
Apr 17, 2014 01:27 AM
