Axle adjuster problem

Reply Subscribe

Thread Tools

Search this Thread

Jul 29, 2012 | 04:22 PM

Chopperbob

Thread Starter

Tourer

Joined: May 2012

Posts: 257

Likes: 1

From: Bama

Axle adjuster problem

Puttimg a new tire on my 95 bagged and while putting back the Brake side axle adjuster is loose but not on pulley side I did remove the adjuster and clean it from years of crap on it any ideas is there up and down to them

Need help ASAP please

Jul 29, 2012 | 04:33 PM

IronWright

Road Captain

Joined: Mar 2012

Posts: 641

Likes: 0

From: none

where your jam nut?????

Jul 29, 2012 | 04:42 PM

Spanners39

Seasoned HDF Member

Joined: Dec 2010

Posts: 7,736

Likes: 1,524

From: Coromandel Peninsula New Zealand

Not sure what you are saying here......is the adjuster still loose when the axle is tightened or is it loose in the swingarm?

Jul 29, 2012 | 04:51 PM

Chopperbob

Thread Starter

Tourer

Joined: May 2012

Posts: 257

Likes: 1

From: Bama

Welded nut is on brake side the plate is not tight against the rear of swing arm like it was before I removed the tire I rode and all feels well if that means anything and the belt is tracking very true as well

Jul 29, 2012 | 04:52 PM

IronWright

Road Captain

Joined: Mar 2012

Posts: 641

Likes: 0

From: none

I figured he was on bout the adjuster bolt.....thats why i says jammers missin...

Jul 29, 2012 | 05:02 PM

Stiggy

Seasoned HDF Member

Joined: Nov 2010

Posts: 17,548

Likes: 7,236

From: Oxford, Nc

My right side adjuster is looser than the left also. I adjust the wheel so that the adjuster plates are tight against the swingarm and tighten the axle down and ride. Never a tracking issue with mine either.