Wacha think?
Seasoned HDF Member
Joined: Aug 2008
Posts: 5,080
Likes: 2,154
From: Ohio
Club Member
Joined: Apr 2011
Posts: 5,803
Likes: 7,830
From: SE Louisiana
Will do. Wealth of info on this site & a lot of knowledgeable people here. Couple of other's that were recommended:
EVL 3000 set @ 9.0-1 or EVL 3010 set @ 9.5-1. Your not going to get 80hp with any of these, but they will pull hard on the bottom, but suggested the EVL-5005, over these, but may be some clearance issues with this one, which is no big deal. On thing that I've learned , from all this, is do your homework. What might work for one rider, may not be worth a crap to the next . We all have different riding styles.
Ride safe,
Harold
EVL 3000 set @ 9.0-1 or EVL 3010 set @ 9.5-1. Your not going to get 80hp with any of these, but they will pull hard on the bottom, but suggested the EVL-5005, over these, but may be some clearance issues with this one, which is no big deal. On thing that I've learned , from all this, is do your homework. What might work for one rider, may not be worth a crap to the next . We all have different riding styles.
Ride safe,
Harold
Fixin' to dig into the reman on the Ultra sometime after Christmas too.
Looks like our target rpm ranges are the same.
For this bike(Ultra),100% two up touring, being all in by 5000, is OK.
Just looking to relieve the constipation of the stock cam, and increase the VE in the most used rpm range(3000-4000).
Don't have to make compromises trying to make the couch fly, it's nice to have lighter bikes for that.
Last edited by Schex; Nov 4, 2012 at 08:34 AM.
Thread
Thread Starter
Forum
Replies
Last Post
