When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1985 FXST.......I still have the original carb on this bike.....It's never been apart and has been trouble free for over 100,000 miles. Well the float is sticking this year and the tap on the bowl is no longer working for very long. I figured I'd take it apart and clean it up.
Problem is i have no idea who makes the carb and i need to get a rebuild kit for it.
Anyone know who made the evo carb in 1985? And will i need any other parts when i pull the carb off.....manifold seals etc
Thanks in advance........and if you have any tips please throw them my way
You can still get the rebuild kit for your carb that should come with gaskets, o-rings and other goodies. The intake for the butterfly style really sucked and the compliance fittings are a pain in the a$$ and are known to leak so be sure to check them carefully when you are done.
I changed to a CV this spring and it is like a new motor. It was way more money then a tuning but I feel well worth the $'s and I hid the receipts so all is good.
You can still get the rebuild kit for your carb that should come with gaskets, o-rings and other goodies. The intake for the butterfly style really sucked and the compliance fittings are a pain in the a$$ and are known to leak so be sure to check them carefully when you are done.
I changed to a CV this spring and it is like a new motor. It was way more money then a tuning but I feel well worth the $'s and I hid the receipts so all is good.
When I had the CV carb on my bike, I averaged about 50 MPG in all around riding. Sometimes as much as 57 MPG under ideal conditions (downhill, with a tailwind).
Not sure about the mileage, don't have my spedo connected. Sure its down a bit for now because I sure have been having fun.
My butterfly was pretty lunched and by the time I changed it and had an intake leak, I didn't really notice that bad because of the gradual change so not really a fair comparison.
If the carbs are well tuned there shouldn't be much difference, riding style is what will kill you every time.
Great question, do you have any mods done to your engine? The CV will be a little more dependable over your butterfly, both should get about the same mileage. But as you've said, you have been really happy with yours over the years, so is it worth the extra money? You have a great looking bike, I see you have those big 2-into-1's. If you have many more mods done to the engine, or plan to have in the future, you may want to consider an S&S. The CV carb is good for about 90hp before it losses it's ability to breathe. At least that's been my understanding.
Last edited by Slammed-N-Senseless; Jul 30, 2013 at 11:38 PM.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.