Auxillary Light Kit install asking for help
Thread Starter
|
Novice
Joined: Aug 2013
Posts: 16
Likes: 0
From: Canada
Auxillary Light Kit install asking for help
Recently decided to install Harley aux light kit . When it came to the part in the instructions to fish a wire through the headlamp housing and splice into the low beam yellow wire I decided I didn't like that plan. And both headlight wires are yellow let alone trying to cleanly install a wire routed through two feet of plastic sleeve then tight wrap and a rubber grommet . So I disconnected the relay and ground rolled them up nice and stuffed the wires under dash for now .
Can someone please tell me a way that enables to use the lights on high or low beam and how to wire it this way, and other than removing tank to splice in to harness .
Can someone please tell me a way that enables to use the lights on high or low beam and how to wire it this way, and other than removing tank to splice in to harness .
Thread
Thread Starter
Forum
Replies
Last Post
Sportster Dane
Sportster Models
4
Jul 17, 2019 06:38 PM
