Here we go ! Another rebuild thread
Thread Starter
|
Cruiser
Joined: Sep 2013
Posts: 159
Likes: 0
From: CNY
Spent a little time after work on it tonight engine should go in tomorrow night if all goes well .
[IMG][URL=http://s879.photobucket.com/user/dadydover/media/BIKE004_zps4fc809a9.jpg.html][IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG][URL=http://s879.photobucket.com/user/dadydover/media/BIKE004_zps4fc809a9.jpg.html][IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Last edited by highbarst; Mar 4, 2014 at 09:02 PM.
Tourer
Joined: Jun 2008
Posts: 306
Likes: 7
From: Somewhere, PA
You're a wiser man than me in wrapping the frame before the motor install. I always lift it in by myself. I always tell myself I won't nick the frame anywhere. And I always end up putting a scratch on the frame where I KNEW I wouldn't hit anything, along with pinching a finger between the motor and frame as I realign what was crooked on the first attempt.
Maybe some day I'll learn. Yeah....right....
Thanks for taking the time to post pics and write-up of the build!
Maybe some day I'll learn. Yeah....right....
Thanks for taking the time to post pics and write-up of the build!
Thread Starter
|
Cruiser
Joined: Sep 2013
Posts: 159
Likes: 0
From: CNY
Got the engine in tonight my lovely wife ( who won't let me post her pic ) came out of the house to help me line the beast up in the frame. Hit the alignment first try and tightened up engine and trans , I was very surprised that the Ultima trans fit so perfect i thought for sure it was going to need to be shimmed .
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG][/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Thread Starter
|
Cruiser
Joined: Sep 2013
Posts: 159
Likes: 0
From: CNY
Yep Thunderheader powder coated flat black will get a better pic for ya tomorrow .
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Thread Starter
|
Cruiser
Joined: Sep 2013
Posts: 159
Likes: 0
From: CNY
Put the shocks on tonight and did the final install of the inner primary , now to my favorite part Wiring !!! Got my new ignition all wired up and the down run on the frame all nice and clean .
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG] [IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]
Thread Starter
|
Cruiser
Joined: Sep 2013
Posts: 159
Likes: 0
From: CNY
Rebuilt and painted my starter at work yesterday also cleaned armature and brushes while i was in there . After 4 hrs. and 2 trips to the hardware store today i finally got these Drag oil lines in . Not even sure i want to keep them on . Oil tank , swing arm , rear master cyl. & brake line all in and got he wiring in the frame all set . Now working on rear fender and setting it up so I can use my sissy bar when my daughter wants to ride off to the hardware store again in the morning .
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG][IMG]
[/IMG]