BAISLEYS HEADS
Thread Starter
|
Novice
Joined: Nov 2007
Posts: 24
Likes: 0
From:
BAISLEYS HEADS
Has anyone done the Baisley superstock95 kit and what do you think? I was thinking of the w5 gearcam for more low end, or should I go with the w6?
I ride a 99 road king, mostly 1 up and short runs around town or back roads.I try to stay offthe interstate. Thanks
I ride a 99 road king, mostly 1 up and short runs around town or back roads.I try to stay offthe interstate. Thanks
Outstanding HDF Member
Joined: Aug 2005
Posts: 2,141
Likes: 4
From:
RE: BAISLEYS HEADS
I'm Running the Baisley Super Stock Heads with 10.5:1 95" Wiseco pistons. I was running the S&S 510G cams It ran strong but I had a Sh*t load of detonation. So I gave Doug at HQ a call and to make along story short I'm now running a set of HQ-0039G Cams and all is good now. My Road King runs verystrong and pulls from Idle to 4800Rpm like a rapped ape. With that being saidIf I were to send off the heads again I'd send them to HQ and have them do the work. From what I've heard I'm leaving about 10lbs of TQ and 10-12 Hp on the table.
Also if you are able to wrench on a KX 500 you shouldn't have any problems with your HD.... Good luck.....
Also if you are able to wrench on a KX 500 you shouldn't have any problems with your HD.... Good luck.....
Thread
Thread Starter
Forum
Replies
Last Post
