When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So now that all the subject matter experts are paying attention to this thread, let me go off topic (sort of) and pose this question. Assuming I build a 107. I know to get the most out of it Im going to have to ditch the V&H short shots I have on and go with a grown up 2 into 1 system. And I know one of the best systems out there is the D&D. Problem is, and no offense guys, I hate the looks of the blacked out version and chrome isnt an option. How much do you guys think I will be giving up by going with a Rhinehart 2 into 1 instead? Noticeable or should I do what I want and not worry about it?
The Rinehart 2:1 is a nice piece. Had one on an '04 V-rod with great mid and upper rpm performance although it did have the tq dip around 3K.
Another pipe to consider is the V&H Big Radius 2:1. I've got one on my '07 FXDWG and it really runs well. Good low end, no tq dip at all, great looks and sound also. Just a thought.
No need to add S&S crank. Just send your off to Hoban/Darkhorse. It's a little less expensive. I haven't seen a 107" in the 120/120 range. Maybe 105/120-125ish. I just don't think you'll see that kind of hp from a 107". It's a crap shoot....Personally, I wouldn't pull the bottom end apart for a 107". If I split cases, I'm going to build a 117".......125/125
JD's tuned a 103" of ours(in service for 4 years prior) that rolled 119 square SAE, recently, FWIW.
JD's tuned a 103" of ours(in service for 4 years prior) that rolled 119 square SAE, recently, FWIW.
Scott, what stage Hillside heads and which cam did you use in that 103".
I was going to bump from 103" to your 107" kit, your Stage 2 work on my heads and keep my Woods 6 in place. Would Stage 3 headwork on my 103"yield similar results as a 107" with Stage 2? Might be a tough question but I'm wondering. Thanks.
main drive belt 41 years later and and I still love the FX's. This is my dream drag type bike with 208 hp and 169 tq blower motor, race transmission, and chain drive. Who needs a pace maker ???? 208 Hp 169TQ 2017 Breakout
No it's not stock, do you think this voids the warranty??
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
