88" Stock 03 Heads VS 06 Heads?
Thread Starter
|
Intermediate
Joined: Jun 2011
Posts: 49
Likes: 0
From: Chandler,AZ
88" Stock 03 Heads VS 06 Heads?
Can someone tell me what the differance between the 88" Stock 03 and the 06 head. I heard that the 06 Heads have better flow out of the box VS the 03's. Then again I hear it doesnt matter if they are going to be ported!
03 ultra 88", S&S 510's, Fueling oil pump and cam cover,V02 naked intake, V&H 4" slip-ons
03 ultra 88", S&S 510's, Fueling oil pump and cam cover,V02 naked intake, V&H 4" slip-ons
Former Sponsor
Joined: Jan 2009
Posts: 19,364
Likes: 40
From: Los Angeles, CA
I just put these heads on my bike last week. I have a 2002 twin cam with a 95" build and 203 cams. there is a noticeable difference with these3 heads without porting or anything. They take a better breather among other differences like better flow, beehive spings, etc.
Drew
Drew
Road Warrior
Joined: Dec 2008
Posts: 1,733
Likes: 38
From: Linden, NC
http://neverworld.net/socalnetscum/f...BStudyRel1.pdf
In the hands of a good machine shop/porting service, '99 casting heads should flow better than 260 cfm @ 28" at .600 lift. So no, doesn't really matter.
Last edited by Weevil; Sep 28, 2011 at 03:20 AM.
Sponsor
Joined: Dec 2007
Posts: 12,084
Likes: 829
Can someone tell me what the differance between the 88" Stock 03 and the 06 head. I heard that the 06 Heads have better flow out of the box VS the 03's. Then again I hear it doesnt matter if they are going to be ported!
03 ultra 88", S&S 510's, Fueling oil pump and cam cover,V02 naked intake, V&H 4" slip-ons
03 ultra 88", S&S 510's, Fueling oil pump and cam cover,V02 naked intake, V&H 4" slip-ons
They do, and it doesn't.
Scott
Thread
Thread Starter
Forum
Replies
Last Post
