Engine work
Road Warrior
Joined: Mar 2011
Posts: 1,378
Likes: 2
From: Macon, GA USA
Make sure it is well broke in before running it too hard.
Thread Starter
|
Advanced
Joined: Jan 2012
Posts: 85
Likes: 0
From: Merrimac Ma
Numbers are in
Make sure you keep this thread up to date. Very interested to see you build and some dyno results. Can't go wrong with Scott, Great guy to talk to business or shooting the ****. I had talked to him about a 10:1, S&S 570g, stage 2 or 3 headwork build. But for right now i am going to run my 10.25:1 se95 build with SE211 cams that came on my bike.
On another note i would bring your bike to Scott and have him do the build. Your closer than me and its about 5 and a half hours for me. While your out there have Joe at Joes cycle repair tune it.
On another note i would bring your bike to Scott and have him do the build. Your closer than me and its about 5 and a half hours for me. While your out there have Joe at Joes cycle repair tune it.
Thread
Thread Starter
Forum
Replies
Last Post
sick_dyna
Dyna Glide Models
19
Jun 14, 2011 07:45 AM
