How to Keep It Clean Tech tip ?
Road Captain
Joined: Jan 2007
Posts: 564
Likes: 48
I do the same, take my time and be careful. I also cover other parts with towls that may be hit or scratched with tools, towls can be held in place with masking tape. I also wear latex gloves to minimize finger prints and smudges all over everything. I also remove my watch and wedding ring when working on the Harley, also use good quality tools. Yes I am **** with a capitol A, more like tripple AAA He He!!!!
Ride Safe,
Bill G
Ride Safe,
Bill G
Seasoned HDF Member
Joined: Apr 2008
Posts: 23,053
Likes: 12,327
From: Arkansas
Tourer
Joined: Mar 2008
Posts: 439
Likes: 5
From: Austin Texas
http://www.dragspecialties.com/fatbo...7732065?q=tank protector & for chrome & new parts: http://solutions.3m.com/wps/portal/3...painters_tape/
Grand HDF Member
Joined: May 2006
Posts: 3,636
Likes: 1,208
From: Ohio
I use the tank and fender covers from Harley. I have also used clean towels to cover up areas. As others have suggested, take your time and envision what might happen. For example, when I took my tank off the Softail the frist time, I thought the rocker covers were at risk for being scratched so I put a piece of cardboard between the tank. Things like this can prevent accidents. Also, make sure you have plenty of lighting in your work area. READ THE MANUAL.
Thread
Thread Starter
Forum
Replies
Last Post
