When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
General Topics/Tech TipsDiscussion on break in periods, rider comfort, seats and pad suggestions. Tech tips as they become available will be posted here.
Put new HD Chrome and Rubber grips on my 16' RK. The throttle side lines up nice with the bar and shield facing directly at the rider. The clutch side does not. I have replace at least 6 sets of HD grips in the past and as far as I know they clutch side grip will only go in one way, you rotate the grip until it locks in place and the switch housing will close around it. Does anyone else have these grips and how is the left side look? For $90 you would think that both sides would match......
Just loosen your clutch side controls and rotate it. It's not that it only goes in way set way. It just needs to be in the housing. Then you tighten down the controls
There is a notch in the bottom of the left grip that locates in the clutch side control housing. If you rotate the grip like you suggest you also rotate the control housing along with your controls.
I have a different set of HD brand grips on my Softail with the same problem. The only time the bar and shield logo lines up on the throttle side is when you have the grip rolled open about 1/4 of the rotation... I guess they figure it's more important to have matching imprints on your palm than having them line up when the bike is parked.
And yes, they are locked into the control housings with no opportunity to align them the same. The clutch side is locked into the housing and the throttle side is held in a different location by the cable ends.
Makes no sense to me... But I also gave up caring about ten minutes into the new grips. They feel ten times better than the old ones.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.