2013 road king wiring issue!
Thread Starter
|
2nd Gear
Joined: Mar 2015
Posts: 6
Likes: 0
From: Vermont
2013 road king wiring issue!
Hey good morning everyone,
I have a 2013 Road King that I am selling. It had 16" bars on it but the gentleman buying it was wondering if I could put the factory bars back on. I didn't have a problem with that.....till last night!
I pulled all the wires out of the 16's, rewired the plugs and installed everything to the factory bars.
Plugged everything in and and these didn't come on:
Right front turn signal
Both rear turn signals
Brake Light
Headlight
Both Aux lights
SO i obviously know something is backwards I just can't figure out what. I wrote down all the pin placements but maybe I screwed it up?
Does anyone have the pin alignment for the 3 plugs ? or have any clue what i've done wrong.
I appreciate any and all help
I have a 2013 Road King that I am selling. It had 16" bars on it but the gentleman buying it was wondering if I could put the factory bars back on. I didn't have a problem with that.....till last night!
I pulled all the wires out of the 16's, rewired the plugs and installed everything to the factory bars.
Plugged everything in and and these didn't come on:
Right front turn signal
Both rear turn signals
Brake Light
Headlight
Both Aux lights
SO i obviously know something is backwards I just can't figure out what. I wrote down all the pin placements but maybe I screwed it up?
Does anyone have the pin alignment for the 3 plugs ? or have any clue what i've done wrong.
I appreciate any and all help
Thread
Thread Starter
Forum
Replies
Last Post
Architect
Ignition/Tuner/ECM/Fuel Injection
6
Dec 22, 2018 06:26 AM
