Kick stand HELP!!

Reply Subscribe

Thread Tools

Search this Thread

Aug 19, 2023 | 01:23 PM

#11

roussfam

Seasoned HDF Member

Joined: Jan 2009

Posts: 12,656

Likes: 8,261

From: Ottawa, Ontario

Quote:

Originally Posted by Old New Rider

What did new springs do for you? Better snap in place? Considering a different spring for my floppy Heritage leg.

Wife's 06 jiffy stand was hanging down a bit, weak spring. Snaps back into place now. Changed the one on my 07 at the same time, just because. They were only like $10 each.

Aug 19, 2023 | 03:51 PM

#12

Old New Rider

Road Warrior

Joined: Nov 2022

Posts: 1,525

Likes: 533

From: MN

Quote:

Originally Posted by roussfam

Wife's 06 jiffy stand was hanging down a bit, weak spring. Snaps back into place now. Changed the one on my 07 at the same time, just because. They were only like $10 each.

Thanks, mine is only 3 years old, but it flops around. I was wondering if a tighter spring might be available. I guess I could go to parts site to see if alternate p/n is available.

Aug 19, 2023 | 04:11 PM

#13

TwiZted Biker

Club Member

Joined: Mar 2009

Posts: 66,094

Likes: 51,354

From: Niles Canyon Ca.

Not all springs are created equal, find a shorter one this is a common problem. The import crap used today are all over the spectrum in quality and consistency even from the dealer.

Aug 19, 2023 | 04:23 PM

#14

Old New Rider

Road Warrior

Joined: Nov 2022

Posts: 1,525

Likes: 533

From: MN

Quote:

Originally Posted by TwiZted Biker

Not all springs are created equal, find a shorter one this is a common problem. The import crap used today are all over the spectrum in quality and consistency even from the dealer.

Thank you!

Aug 19, 2023 | 04:37 PM

#15

roussfam

Seasoned HDF Member

Joined: Jan 2009

Posts: 12,656

Likes: 8,261

From: Ottawa, Ontario

OEM from the dealer was under $10

Aug 19, 2023 | 04:49 PM

#16

dawg

Seasoned HDF Member

Joined: Jun 2006

Posts: 28,473

Likes: 3,950

From: Vermont

Quote:

Originally Posted by roussfam

Wife's was hanging down a bit.Snaps back into place now.

Quote:

Originally Posted by Old New Rider

Thanks, mine is only 3 years old, but it flops around.

Quote:

Originally Posted by TwiZted Biker

Not all are created equal, find a shorter one this is a common problem.

How to dirty up a thread quick!

I agree, different spring should fix you up.

Aug 19, 2023 | 06:03 PM

#17

Max Headflow

Seasoned HDF Member

Joined: Dec 2005

Posts: 19,830

Likes: 7,968

From: poway

Quote:

Look at the tab on the side stand that the spring hooks one. Bet it's bent.. It's typically really hard to bend the stand itself but I guess it's possible..

Maybe I didn't state this right A common issue when smacking the side stand due a bump on the ground is that the tab that the spring hooks on gets bent up. No much but enough that the sidestand can sag.. In this case it's pretty simple to bend it back out with a crescent wrench or vice grips. It will restore the tension on the spring and hold the stand up..

Btw, it is really hard to bend the side stand itself.