SERT Questions

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2006 | 02:31 AM

wlbowers

Thread Starter

Stellar HDF Member

Joined: Dec 2005

Posts: 3,234

Likes: 106

SERT Questions

Finally got the serial to usb to work with my Toshiba. Kept throwing blue screens when I tried to connect.

Got a different model and works like a champ.

I am running everything stock right now. I would like to raise the redline to 6200 and can't find where to do that.

Also I know you can't download what is in the ECM. ( That sucks )

I had the 25 degree injectors installed under the service bulletin, and was wanting to get the dowload file that was put in at that time.

Anybody know if it is available and if it is what is the name of the file.

Jul 9, 2006 | 03:19 AM

mud

Club Member

Joined: May 2006

Posts: 14,564

Likes: 9,225

From: the 50s & the 60s

RE: SERT Questions

Quote:

ORIGINAL: wlbowers

.................................................. ..........................
Also I know you can't download what is in the ECM. ( That sucks )
.................................................. ..........................

Agreed. This should be changed.

At any rate, I think it should be changed.

mud

Jul 9, 2006 | 07:00 AM

Dan B

Cruiser

Joined: Dec 2005

Posts: 193

Likes: 0

RE: SERT Questions

To change the rpm limit.
From the meny, choose "table selection" and then "ECM tuning constants".

Need to know your setup to know what clibration file you should use.

/Dan

Jul 9, 2006 | 09:51 AM

springer_

Road Captain

Joined: Sep 2005

Posts: 583

Likes: 5

From: Maine

RE: SERT Questions

You don't just change a single parameter. You need to change the rev limit in a MAP then upload the entire MAP to the ECM.

Checkout this thread https://www.hdforums.com/m_222256/tm.htm and look for step 17, it explains the REV limit.