MRC easy clutch HD-0001 (few pics)
Thread Starter
|
Cruiser
Joined: Oct 2008
Posts: 139
Likes: 4
From: Hot Springs, NC
MRC easy clutch HD-0001 (few pics)
MRC HD-0001 installed on 01 FXDL. Pics included are the trans side cover stock assembly and the next pic is the side by side view with MRC on right. The ball bearings on the MRC are larger.
Thread Starter
|
Cruiser
Joined: Oct 2008
Posts: 139
Likes: 4
From: Hot Springs, NC
I have the stock clutch cable (12 years old) and the stock clutch spring. I use Tri-Flow (small dripper bottle) to lubricate the clutch cable. The clutch lever is effortless to pull. I'm one of those people that go around at the dealership, etc.... and pull in clutch levers and I'd have to say that mine is smooth and easy compared to most.
Easy pull clutch & clutchwiz
I have the Easy Pull Clutch Kit plus the ClutchWiz installed on my FXD2003.
Both easy to install and they give excellent results: only one finger needed to pull the clutch lever now!
Click image to find some more info on the ClutchWiz
Both easy to install and they give excellent results: only one finger needed to pull the clutch lever now!
Click image to find some more info on the ClutchWiz
Last edited by FXD2003Rider; Feb 14, 2013 at 03:27 AM.
Thread
Thread Starter
Forum
Replies
Last Post
csharley
Sportster Models
22
Jan 31, 2013 12:23 PM
