When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
thats the pipe I'm getting, ,AND The Inverted Arlen Ness Intake!!!! complimented with a dynijet power tuner, the guy tuning my bike, my builder knows him well, he's at sturges now on his way home, bike will be tuned next week with DYNO SHEET TO SHOW ALL!!!!!!, but he's one of the very best tuners east coast Well known From BlackHills Motorcycles
p.s. listen to when he revs, wait for it, for anyone who doesn't know Hillsides builds.....this is with SS cams....listen to this MONSTER...107 fat bob...unreal!! I cannot wait
Thanks for the encouraging words ,sure I'll post some before pics,in 2 weeks there will. Be changed but not to much aesthetics's,do you have a link to the rocker thread ?? Thanks
Those in doubt of the power etc, read post #6 and #7, #7 is my builder, and I am doing headwork, so that extra fat 10/10 he's talking about ill have, and than add in the throttle body work, exhaust, kick *** tune, etc...120/125
is my target, there getting with the 570 cam 100/110 WITHOUT headwork....im doing ALOT more, and those 2 guys, in my opinion, know the most on here above anyone about motors, Scott builds em, the other Races em...lol...but he build as well, that cam is CHOICE in a good 10.1 107' build.....AWESOMENESS,and I have one of the best tuners in east coast tuning my bike, talked to him today, gonna break it in on dyne and going with TTS Mastertune http://www.mastertune.netthis as a tuner, again, ONLY THE BEST WILL DO!!!! AMAZING!!!!
All quality
just a few pics of my builder talent!!!...hes built up to 143ci, and better I'm sure...Holds a NY record,Fastest 8-second GAS BURNING 108'!! ... hello....
p.s. listen to when he revs, wait for it, for anyone who doesn't know Hillsides builds.....this is with SS cams....listen to this MONSTER...107 fat bob...unreal!! I cannot wait https://youtu.be/SXYKGgE6mBs
THEY BUILD MOTORS, THATS THERE AIR FILTER AS WELL, FLOW BENCH TESTING THE HEADS, NO GUESSWORKe HERE
NEVER HEARD ANYTHING LIKE THIS ANYWHERE??????
That is target64 old bike. Forum member here. Awesome mechanic. He has been doing some beta testing with cyclerama I believe in an even more impressive build. That 107 bike sounded nasty.
That is target64 old bike. Forum member here. Awesome mechanic. He has been doing some beta testing with cyclerama I believe in an even more impressive build. That 107 bike sounded nasty.
Yea, I'm following suite, hopefully mine will work out the same, I'm calling tomorrow if not to late, I might bump up to stage 4 cylinders, up the work a 'TAD' LOL
That is target64 old bike. Forum member here. Awesome mechanic. He has been doing some beta testing with cyclerama I believe in an even more impressive build. That 107 bike sounded nasty.
QUICK Q that exhaust is one of the 2 I'm looking at the Bassani Road Rage 2 I think, there both 2-1, do you scrape at all? and is your B/O lowered?...I scrape my pegs all the time, but that was stock tires, they were so flat I laid bike down thru the canyon runs in PA.....going with forward plus 4' or 2' as I'm 6'2, 280, thinking more comfort naturally, and , less scraping as pegs will be out more???? thanks man....
I have scraped the pipe 1 time in the 3 .5 yrs I 've had it. Pegs yes. Bike is not lowered. Btw, the pipes finish is like it's new. Very high quality. The scrape was on the lower head pipe at the lowest point ( around the foot brake)
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
