When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That must be a pre can bus thing. My '11 does not have any bulges in the wiring there. FYI I've had 2 rockers, and logged well over 100k between them, and only had one of the rear lights go out, and it was just over 100 bucks to replace it.
this is funny, when I bought my new action cam, and had bike like 2 weeks last year, a ride to the bakehouse, lost alll footage on boats etc, I am learning, this channel I'm doing fun stuff w kids etc...but will have vids of bike w/107 so we can hear, get what you pay for tho, no air noise??? PERFECT, I talk way to much tho, should edit that crap out, I was excited, new bike, summer, going to bakehouse where all my friends/family was...good times 4;16 I lay that bike down 45mph thru the turn,,,lol,, on stock rubber..
Well motor should be in today Pica to follow as well as cams are in pics to follow.new Barnett Kevlar clutch extra springs in with Screamjng Eagle stiffer clutch spring,pics again,lol,chrome top motor mount is in,tires etc,finally found amazing bars thate custom so there like 700$ and the rims we'll look for yourself,this bikes gonna be crazy!!!
Will have a 21 front ,going with Haag haulter trees and wide glide tubes ,can't use trees as they hit tank,another<br/>Member on here helped me with that one,so mono tubes and a nice FAT FRONT end,maybe a larger headlight??
when I got there he was about to pull bearings out, motors there tomorrows boy.......gonna get chrome bars for now, as the custom made one is coming from UK, has to be powder coated Pacific Blue like rocker c..and Chrome tips, and width of trees all that good stuff, so I ordered a nice set of 1 1/2' fat carlinnis for now, all chrome levers new switches with chrome buttons, and 2 of the new Harley Large Turn Signal Buttons, easier to use with gloves, colder weather, etc
had clutch in, pull is DEFINATLLY harder, but the Barnett is 40 percent more, the SE only 20, no wonder the Barnett guy steered me to the SE he said if I'm racing on a line its great, cause its a on off switch, for those that don't know...and a tiny window to tune...
you can see campmate all cleaned up, when I got there, oil pump looked new, had high pressure grease, and oil in parts, had a rollout gauge to measure rollout, SO GLSAD I GAVE IT TO A PROFESSIONAL, AND NOT DO, he's measuring the relief spring, doing a lot more than I would of, the plate and old cams look new, so they will be for sale for sure......3k miles is nothing, as first 1900 most likely never went over 60mph for sure!!!!
oh yea all new tensioner shoes, in the primary, we ordered a baker, self adjusting? 200$ supposed to be the best, quiets noise , does so much, ill find out exactly what we got...
Best Looking Bars to me, I'm not into apes, but these are sick!!! gonna be made custom to my comfort, the pull were gonna measure the height 14" seems good, and the angle etc....than Powdercoating and Chrome Tips
think he does the best bars out there, the "wings" might be Iron Cross, I haven't decided yet, I might lay a cool design of my own, CUSTOM no one will have these, and those rims....starting to come together with a great CUSTOM BUILD not a internet build like most I seee, for the $$ I want it to stand out!!im sure ya'll can relate
Fortress cycle.com in the UK, you have to see what this guy does, AMAZING, sissy bars, with pointed devils tails for the girls, I mean dream it , he can build it....worth 800 or so for that, would you say???? do it ONCE.....and it will stick out, with the rims, I'm excited now more than ever.....and MOTOR NATURALLY...PICS TOMORROW OF ALL THAT WORK!!!!
the way they sway back, goes with chopper like angles of bike, I've seen similar, and I wouldn't do straight apes.....has to have this flow to look legit, than you mount straight up, and the bars 'come' to you, LOL
A full explanation of the problem, and my cure is on my website.
John @ Rockout
__________________________________________________ ____ For ROCKOUT information & purchasing please click the LINKSbelow... For all Twin Cams and Evo Big Twins & Sporsters
THOSE ROCKOUTS look great saw them today, the ones you shipped to JPR Cycles in NJ, thats me!!!
he said they only go on exhaust side? and there were 2 extra/ sound right,. def a sloppy mould on Harley's part there, ill be changing the rockouts when I put in rolling rocker...over winter...
He's right, only on the exhaust side. It takes 4 to do the bike, I include an extra... usually not needed but nice to have. Plus, it gives you one to show a friend If you got 2 extras I want one back
Thanks again,
John @ Rockout
__________________________________________________ ____ For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support! Ordering & info http://www.rockout.bizOn ebay! ...CLICK HERE Also on amazon.com...
So while your waiting for custom bars to get done you're gonna buy carlini's? Why not just use stock/current bars instead of wasting the cash. You never know if your custom bars will be able to reuse the lines/wires/cables from the carlini install. If they can't, That could be a big waste a cash right there. Carlini's use to be a lot bigger than their specs stated. Not sure if they made them more accurate.
Any way those custom bars gnarly.
Last edited by Hawaii-Five-Jo; Aug 25, 2017 at 08:12 AM.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
If you got 2 extras I want one back 
