When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just installed one, but on my bike it slides in a different spot. Looking at the install instructions, it looks like you’re trying to get it in the right spot... see pics below.
It looks like it is fitting in there right (logo out). But if it’s just the antenna is hitting the plastic molding, I’d cut me a groove in the plastic, so I could run the antenna and not have it pinched or kinked too tight. The electrical connnector looks like it’s in its slot, just needs the wire routed around the holders.
Siren works but it won't go in the area I assume is for it. Plug won't go in and antennae hits.
I Cannot tell from your pics (on phone) so image is small, but the area it goes in should allow it to snap in and the wires are in a notch or groove in the plastic. It will only fit one way and it's a beeecth to get it in. Siren faces out
Your third picture looks correct. The instructions indicate to just bend the wire to the left to squeeze the siren into its slot.
I'm pretty sure I remember doing just that when replacing mine a couple years ago. The old one had died, and, as I found, it had been installed backwards.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
