113" Twin Cam Power Package for Harley Twin Cam A Engines by Ultima questions

Reply Subscribe

Thread Tools

Search this Thread

Jun 8, 2019 | 01:45 PM

Shaggy Kusmaul

Thread Starter

Stage II

Joined: Jun 2019

Posts: 2

Likes: 0

From: Vernon

113" Twin Cam Power Package for Harley Twin Cam A Engines by Ultima questions

My motor is passing oil at high RPM though the air breather. How do I fix this on new rebuilt motor?

Jun 8, 2019 | 02:15 PM

ntraindavefl

Road Warrior

Joined: May 2011

Posts: 1,956

Likes: 439

From: florida

Run external breather lines from the breather stand offs
Drill out the stock rocker plate drain holes to 1/8”
Lower your oil to half down the dipstick

Jun 8, 2019 | 02:21 PM

Shaggy Kusmaul

Thread Starter

Stage II

Joined: Jun 2019

Posts: 2

Likes: 0

From: Vernon

Tried

all ready did that but its still pushing to much oil through.

Jun 8, 2019 | 02:46 PM

ntraindavefl

Road Warrior

Joined: May 2011

Posts: 1,956

Likes: 439

From: florida

If you blocked off breather venting to the AC then the oil is coming from the intake manifold. Take off tbody and check for oil there, you might have leaky valves

Jun 8, 2019 | 06:04 PM

Screamin beagle

Seasoned HDF Member

Joined: Jun 2017

Posts: 5,315

Likes: 4,272

From: Granville New York

Is it possible the gaskets for the rocker boxes got put on wrong and are blocking the passages for the breathers? It's a very easy thing to put them on wrong.

Jun 8, 2019 | 06:46 PM

1 2 many

Road Captain

Joined: Mar 2011

Posts: 555

Likes: 91

From: so cal

What he said ^^^^

Jun 9, 2019 | 07:47 PM

Max Headflow

Seasoned HDF Member

Joined: Dec 2005

Posts: 19,863

Likes: 7,982

From: poway

If you get the rocker box lowers in wrong you'll blow oil out between the rocker base and the head. If you used the stamped steel breathers you might have assembled them wrong. Check cylinder leakdown. If over 10% you might have ring seal issues.. If you mucked with the pump there might be an issue there.