32 ford tail light issues
Thread Starter
|
Novice
Joined: Feb 2015
Posts: 22
Likes: 0
From: Washington, DC
32 ford tail light issues
I recently installed a 32 Ford rear tail light/licenses plate kit on my 2007 Night Train. Chopped the rear fender removed the stock tail light and turn signals. after installing the rear tail light/break light I'm only getting the tail light to work and no break light. Ive checked all the pins and wires...Any ideas of what could be the issue?
Maybe try buying the breaklight module kit from harley. It's fairly inexpensive and super easy to install. That would be my first thought on getting it to operate properly. I have one on my train and everything works as it should.
Stage II
Joined: Mar 2009
Posts: 2
Likes: 0
I had a similar issue when I installed 59 Caddy tail lights on my Heritage, turned out to be a weak ground in my case. Do you have standard or LED lights? Sometime on the old standard type bulbs the connectors can become corroded and need a little cleaning.
Thread Starter
|
Novice
Joined: Feb 2015
Posts: 22
Likes: 0
From: Washington, DC
I have the standard.
The light didn't come with a ground wire, it said it wasn't needed. I'm going to ground the light and see what happens.
Thanks for the help, ill let you know how it goes.
The light didn't come with a ground wire, it said it wasn't needed. I'm going to ground the light and see what happens.
Thanks for the help, ill let you know how it goes.
Thread
Thread Starter
Forum
Replies
Last Post
