Rocker-C Build
#1
12-22-2016, 03:44 AM
Rocker-C Build
Decided to show my "build-progress", all started in 2009 where I installed a bunch of stuff to replace some of the dreadful HD.
First steps where some chrome upgrades and additions:
Grips and pegs
Shifter, brake and gear-stick levers for Bullet style
Installed the Heartland conversion EZ_R with custom-covered by Danny Gray seat
Lowering bolts for the suspension
Added their mirrors and indicator lights
TD-products license plate holder
HD Chin spoiler
Chrome belt cover
Chrome brake calipers
Vance and Hines 2-2 w/Big city queit baffles
HD handlebars
HD "chrome" control lines
Tassels on the break/clutch levers from Capt'n Itch
So everything was fine.... (or was it?)
Soon the rear suspension was replaced with Shotgun Shocks' airride (what a great improvement, I was lucky my kidneys survived the lowering bolts) and the front was lowered somewhat with progressive springs also added were:
A 21" replica front wheel from Paul Yaffe
Heartland 21" front fender
a chrome 18x8" chrome rear wheel
MotoX oil tank
So all happy again, right?
no... added a new handlebar (local made mini ape) and the front fairing. Also replaced the short rear fender with a longer one from Heartland.
But then I saw the engraving on ink83's project and that kicked me off again.
So the rocker covers and housings, the cam cover and a few bits came of and are now with Catur in Indonesia for engraving. In the mean time getting the following done:
Primo Open Belt drive (side covers with Catur for Engraving)
Footboards custom made by TD Products
parts to made out of brass: (pegs and grips amongst others)
lining some stuff up for copperplating
will start adding pictures of stuff as they come back to me!
Robert
First steps where some chrome upgrades and additions:
Grips and pegs
Shifter, brake and gear-stick levers for Bullet style
Installed the Heartland conversion EZ_R with custom-covered by Danny Gray seat
Lowering bolts for the suspension
Added their mirrors and indicator lights
TD-products license plate holder
HD Chin spoiler
Chrome belt cover
Chrome brake calipers
Vance and Hines 2-2 w/Big city queit baffles
HD handlebars
HD "chrome" control lines
Tassels on the break/clutch levers from Capt'n Itch
So everything was fine.... (or was it?)
Soon the rear suspension was replaced with Shotgun Shocks' airride (what a great improvement, I was lucky my kidneys survived the lowering bolts) and the front was lowered somewhat with progressive springs also added were:
A 21" replica front wheel from Paul Yaffe
Heartland 21" front fender
a chrome 18x8" chrome rear wheel
MotoX oil tank
So all happy again, right?
no... added a new handlebar (local made mini ape) and the front fairing. Also replaced the short rear fender with a longer one from Heartland.
But then I saw the engraving on ink83's project and that kicked me off again.
So the rocker covers and housings, the cam cover and a few bits came of and are now with Catur in Indonesia for engraving. In the mean time getting the following done:
Primo Open Belt drive (side covers with Catur for Engraving)
Footboards custom made by TD Products
parts to made out of brass: (pegs and grips amongst others)
lining some stuff up for copperplating
will start adding pictures of stuff as they come back to me!
Robert
The following users liked this post:
LRZ (10-30-2017)
#2
12-22-2016, 06:39 AM
#5
12-24-2016, 02:34 AM
#6
12-24-2016, 10:14 PM
Club Member
#7
12-24-2016, 10:47 PM
Road Warrior
Join Date: Jul 2012
Location: Cranbourne, VIC Australia
Posts: 1,996
Received 416 Likes
on
311 Posts
