When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Everyone.
Hoping someone might have some suggestions for me here....
We would like to find a backrest with armrests for my '07 Fatty's passenger seat. This is for our 8-year old little girl - all 43 pounds of her - so it would serve as kindof a child's seat. Just a little something to assure her safely/stabilityback there, since her feet just barelyreach the footpegs. (We've tried relocation the passenger pegs, but none come with mounting bracketsthat fit the '07's. But regardless of the footpeg situation, we'd feel better with some short armrestsaround her.)
We're thinking that we're just going to have to have some made... you know, weld some supports to the backrest, have them padded & hope it doesn't look too crappy.
Any suggestions on either of these options?
Thanks!
~Lisa~
A friend of mineinstalled aluggage rack with a small quick disconnect trunk on his bike for his daughter. It featured fold up arm rest that would actually go 180 and rest along side the trunk when not in use. Looked ok when riding 2 up.
Check here. It does not have backrests but does secure the child a bit. We saw this at the Miracle Ride a few years ago. They used to carry them at Southside Harley.
I dont know if you have these in the US, but here in Sweden we have this type ( Hope pic works) They have a back support and arm support, it is fastned to the bike frame or back seat, Good for children up to 12 years though not cheap about 300 US but then Sweden is expensive ,Good luck,
Hi Everyone.
Hoping someone might have some suggestions for me here....
We would like to find a backrest with armrests for my '07 Fatty's passenger seat. This is for our 8-year old little girl - all 43 pounds of her - so it would serve as kindof a child's seat. Just a little something to assure her safely/stabilityback there, since her feet just barelyreach the footpegs. (We've tried relocation the passenger pegs, but none come with mounting bracketsthat fit the '07's. But regardless of the footpeg situation, we'd feel better with some short armrestsaround her.)
We're thinking that we're just going to have to have some made... you know, weld some supports to the backrest, have them padded & hope it doesn't look too crappy.
Any suggestions on either of these options?
Thanks!
~Lisa~
Do you have floorboards for the passenger? If so you could try the adjustable floorboard kit. It is pricey but allows my to have the wife and 8yo son to each ride comfortably.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.