Saddlebag lights
Thread Starter
|
3rd Gear
Joined: Oct 2011
Posts: 7
Likes: 0
From: toronto
Saddlebag lights
Have a 2000 softail bagger trying to put on saddlebag lights on #67800241A- ELECTRA GLO SADDLEBAG LIGHT bike does not have the newer connection wonder if I could hardwire it
Thread Starter
|
3rd Gear
Joined: Oct 2011
Posts: 7
Likes: 0
From: toronto
Saddlebag lights
my question to you is I have Two plugs going into the controller that controls the lights one in and one out how do I hardwire my lights to that
Grand HDF Member
Joined: Apr 2010
Posts: 3,590
Likes: 1,151
From: Brandon,Fl
What I did was use a test light to find which wire lit each turn signal and tapped into it ( seeing as I have the r/t/b setup ) that wire will also activate my brake lights. Then I tied the ground wires together and used a bolt on the frame as a ground...
Grand HDF Member
Joined: Apr 2010
Posts: 3,590
Likes: 1,151
From: Brandon,Fl
Also, were you looking to make these function as r/t/b? If you only want them to be a running light, see if you have an orange wire with a white stripe on it back there, on a lot of our bikes that is a switched power wire you could tie into. Look for it and test with ignition on...
Thread
Thread Starter
Forum
Replies
Last Post
mike79
2014-2024 Touring Models
10
Apr 29, 2018 09:17 AM
