primary style swap
Thread Starter
|
Stage I
Joined: Jul 2023
Posts: 1
Likes: 0
From: MI
primary style swap
I have a 1987 softail fxstc. The starter solenoid is separate from the starter and mounted on top of the inner primary. My inner primary cover (part number 60630-86A) is cracked and I am having a hard time finding one to purchase. I was recently told it was possible to convert my current setup to the 90's model setup where the solenoid is attached to the starter. I am trying to figure out if this is possible and what components I would need to change out to make it work. Any and all help and advice appreciated. Thank you
Road Captain
Joined: Sep 2014
Posts: 514
Likes: 109
From: Utopia
Seasoned HDF Member
Joined: May 2008
Posts: 21,103
Likes: 12,648
From: South Carolina
In addition to replacing the inner and outer primary covers with parts from `89 or later, you will also need to rework the transmission case.
The hole in the starter mounting ear on the transmission case must be bored out to a larger size to accommodate the `89 or later starter motor.
Sorry, don`t know what the dimension is.
The hole in the starter mounting ear on the transmission case must be bored out to a larger size to accommodate the `89 or later starter motor.
Sorry, don`t know what the dimension is.
Thread
Thread Starter
Forum
Replies
Last Post
