When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone bought the V&H BSS pipe's ??? Could you point me in the right direction looking for a good
deal on a set of pipe's and SE high flow intake........Have an 07 Heritage Classic....Thanks
FYI - I got my BS at American Classic Motors. They have an E-Bay Store and are located in PA. I paid $445 shipped. I ordered them on Monday, got them on Friday. I was a little nervous in that I hadn't seen them for less than $525 anywhere else. Would definitely order from them again. Cyclespot.com had K&N's for $41 plus $6.95 shipping. Do a Google search as you may find one a bit less some place else. Good luck!
The "click-bid-buy" is not the way to go. You are talking about a journey to Stage 1 that will forever (positively) alter the way you enjoy your ride.
With the pipes and a/c you also need a fuel manager. Because I bought the V&H BSS, I also bought their FuelPak. Arlen Ness Big Sucker was my a/c of choice. You do NOT want to add both pipes and a high-flow a/c without accounting for a new fuel mixture.
Your pipes need to keep the mounting points for the O2 sensors, which changes the price for the BSS. Mine cost me $611 (which I think is full MSRP), full-pop too for the FuelPak, but I wanted to make sure that I was getting the latest firmware version (# 12) from V&H, and not some left-over verson 11 from an internet store.
I paid for good stuff, I paid for loyality from V&H, and I paid for my custom shop to make a buck off of me to install everything that will come back ten fold. I paid about $1100 for all my stage 1 stuff, then about $210 for install labor. I got all the right stuff, it all fit, it all worked.
Best of luck with you NEW adventure and the resulting NEW bike!
(P.S. are all your fluids already synthetic? Your bike will thank you for stage 1 and syn-juice by running at least 20 degrees cooler!)
For what it's worth, I know American Classic sells the BSS for '07 with the two O2 sensor ports already welded in for $443.95 shipped. They have the Fuel Pack with the latest firmware version for $198.95 shipped. They are an authorized V&H dealer. I've only purchased my Big Shots from them so mine is just a single experience. Poor Boy does bring up two points:
- If you go with a custom shop, they might not install stuff not purchased through them (check to see). Never hurts to throw them a bone. Poor Boy is right - you may save money in the long run. I haven't found a local guy as fo yet so I went self-install.
- Check to see what the latest firware version is before ordering.
I have a set of used V&H BSS with quiet baffles. I'll also sell my Stage 1 aircleaner. The pipes have some minor scratching on the shields. Could be polished out or will come out with repeated chrome polishing. They are not perfect, but look very nice. Includes all brackets and bolts.
You and Tom134 have (had)good points about smart shopping and of course it is always good to save money. 1BadTrain, you havea beautiful bike and I hope to one day have all the skills to do my own wrenching like you. I paid through the nose on my stage 1, but not because I was foolishly throwing away money, but rather from being told by my dealer that they wouldn't do stage 1 yet (at the time) because of my bike being a too new'08. My custom shop guy did all the homework and personally spoke with V&H several times before any '08 data was available to the second parties (like V&H) from the MoCo.
My bike was purchased on July 16th (the first week 2008 bikes hit the dealers)not even a month old this past August when I paid (a lot) to have one of the first '08 bikes modified to stage 1. I had just under a thousand mileswhen Ihad my shop guys do the stage 1 and a full snythetic oil switch-over. I hadn't even made my first bike payment yet and I was nervous as heck about being the solo person to wrench away.
The butterflies are gone now, and I have been doing all my own accessories and acquiring needed tools along the way. I'm getting there.
When BERRYP only mentioned wanting the best deal on pipes anda/c I was alarmed that there was no mention abouttheneededfuel computer to go with that stuff. "My bad" if my impression was that maybe he was stepping into an arena that isn't always just about the money.
Been there PoorBoy - I've spent a little more money on various things just because I was more comfortable going with one vendor over another. We all do it. I would have done the exact same thing as you with an '08. The only reason I did my install myself is I got a lot of great advice (yours included) from a lot of folks on this very forum and the fact my only install option was a Harley dealer. I'm dangerous with a wrench! [sm=crossbonesgif.gif]
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.