Goofed up security system install
Thread Starter
|
Cruiser
Joined: Aug 2007
Posts: 157
Likes: 2
From:
Goofed up security system install
So after installing the HD security system (just the basic one with procsimity fob) on my 08 Night Train the bike wont start. Install was easy and I followed theinstructions for the code learning deal to the T, but guess I still goofed it up some how cuz now the bike wont start. It kickes over and tries to start but dies.
So is there a way to reset things so I can atleast ride it untill I can get to the dealer to have the fob programed?
So is there a way to reset things so I can atleast ride it untill I can get to the dealer to have the fob programed?
Advanced
Joined: Oct 2007
Posts: 96
Likes: 0
From: Ontario Canada
RE: Goofed up security system install
I don't think you goofed up.
From what I have read and been told by my dealer, the TSSM module must be married to the ecm by the dealers computer before it will run.
I could be wrong, and I plan to do the same thing in a month or so. So I will wait for more answers you get.
From what I have read and been told by my dealer, the TSSM module must be married to the ecm by the dealers computer before it will run.
I could be wrong, and I plan to do the same thing in a month or so. So I will wait for more answers you get.
Tourer
Joined: Dec 2006
Posts: 389
Likes: 31
From: Pennsylvania
RE: Goofed up security system install
here is the procedure flow chart for marrying the TSSM if you mess it up you need to go all the way back to the beginning.
[IMG]local://upfiles/21876/DD7A52F369244393AB5A65584DAB0AA5.jpg[/IMG]
[IMG]local://upfiles/21876/DD7A52F369244393AB5A65584DAB0AA5.jpg[/IMG]
Thread Starter
|
Cruiser
Joined: Aug 2007
Posts: 157
Likes: 2
From:
RE: Goofed up security system install
That's the same chart I used. I tried it a couple times doing exactly what it says to do. Only differance I saw is that in step 6-10 it says it takes 10 mins for the light to turn off......mine only took a few seconds. After the first time I tried and it didnt start I thought I messed something up so I took a break for lunch and to think it through. Came back about 30 mins later and tried again....same thing. Scratched my head for a few more mins then tried it one last time......same. So I got fed up figuring I jacked up my computer or something and put the bike away. Figured I'd have to have it towed to the dealer to have them mess around inside the computer, besides they need to program the FOB anyways. Just trying to avoid the charge of a tow truck (my pickup is too tall to push a dead Harley up into).
Thread
Thread Starter
Forum
Replies
Last Post
